Skip to content
Driveway King logo

Driveway King Project Case Studies

Concrete Driveway Case Studies in Colorado Springs

Driveway King specializes in concrete driveway replacement, installation, extensions and repairs in Colorado Springs and the Front Range. Explore our driveway case studies for project photographs and explanations of site preparation, form work, concrete placement, drainage, joint layout and finishing.

Request an Estimate Call 719.323.5024
info@drivewayking.com

Concrete driveway projects in Colorado Springs

Explore residential driveway replacements, new installations, hillside approaches, and decorative designs from the Driveway King project gallery. Each entry brings the location, project size, original condition, site preparation, construction details, and finished appearance together in one project profile.

Project information

Every project card includes a neighborhood, completion month and year, square footage, and service category. The case studies explain the work from the original driveway condition through excavation, base preparation, forming, placement, finishing, joints, and curing. Each entry also includes upkeep guidance and a budget comparison for homeowners considering similar work.

Concrete driveway construction for Colorado properties

Driveway construction depends on the property’s ground conditions, slope, drainage, vehicle use and access. Colorado’s freezing temperatures and seasonal weather also inform preparation and material specifications. The construction discussions explain how these considerations shape a project. The written scope for each property establishes the work included and the applicable specifications.

2026 Cost Guide

Understanding the cost ranges

Budget comparisons use the Driveway King 2026 Cost Guide, updated August 19, 2026. They describe comparable work at current guide rates rather than the amount paid when the photographed project was completed. Site conditions and the written scope determine the final price. The upper examples are open ended.

ServiceEntry rateTypical rateComplex rate
Concrete driveway replacement$10$15$22 or more
New concrete driveway installation$8$12$20 or more
New construction driveway$8$11$18 or more

All rates are per square foot. Multiplying the listed project area by each service rate produces the budget anchors. Decorative work, difficult access, soil correction, drains, and public apron work can take a project toward or beyond the complex example. The comparisons do not automatically stack overlapping allowances or add a neighborhood surcharge.

Project Index

Explore 50 driveway case study entries

The entries follow the project gallery order. Some photographs show details or additional views of the same driveway. Before photographs are not available. Paver features are identified separately from poured concrete.

Project gallery2026 cost guideConstruction standardsColorado Springs service area

Case study 01

Broom finish driveway beneath mature trees

Neighborhood
Rockrimmon, Colorado Springs
Completion date
May 2024
Square footage
1,050 sq ft
Project type
Concrete driveway replacement
Broom-finished concrete driveway beneath mature trees in Colorado Springs.
Broom-finished concrete driveway beneath mature trees. A completed Driveway King project in Colorado Springs, Colorado.View gallery image 01

Original problem

The existing driveway had uneven panels and worn edges beneath the mature trees. The homeowner wanted a consistent approach that suited the established landscape and provided a practical surface for everyday vehicle access.

Preparation

The old concrete was removed within the agreed driveway limits. Nearby trees and landscaping were protected during excavation. Exposed ground was evaluated, loose material was replaced, and gravel was compacted in layers before formwork established the edges and drainage direction. Equipment staging and debris handling stayed within the construction work area. Forms were braced before placement, and loose material was cleared from the base perimeter.

Construction details

Reinforcement was positioned before the concrete was placed, leveled, and finished with a consistent broom texture. The driveway edges were finished to meet the surrounding landscape. Control joints followed the panel layout, and curing began after finishing. Vehicle access remained restricted during the initial curing period. Supports held the reinforcement in position during placement. Concrete was worked along the forms before edge finishing, and separation was maintained where the new slab met fixed structures.

Finished result

The completed approach presents a consistent broom texture within the mature landscape. Its simple gray surface keeps attention on the home and trees, while the defined edges give the driveway a clear outline through the established residential setting.

Cost range for comparable work

The 2026 guide range for comparable work is $10,500 to $23,100 or more, with a typical benchmark of $15,750 at $15 per sq ft. The calculation uses 1,050 sq ft at $10, $15, and $22 or more per sq ft. Tree protection, restricted equipment access, removal and disposal, the amount of base correction, and total driveway area influence pricing. Edge work beside established landscaping also affects the installation effort.

View the 2026 cost guide

Care and maintenance

Keep leaves, landscape material, and irrigation from collecting against the driveway edges. Maintain clear runoff paths and follow the written curing, snow removal, and joint maintenance instructions.

Case study 02

Curved driveway at a hillside home

Neighborhood
Peregrine, Colorado Springs
Completion date
June 2025
Square footage
1,850 sq ft
Project type
Concrete driveway replacement
Curved light-gray concrete driveway leading to a hillside Colorado Springs home.
Curved light-gray concrete driveway leading to a hillside Colorado Springs home. A completed Driveway King project in Colorado Springs, Colorado.View gallery image 02

Original problem

The curved hillside approach had an uneven driving surface and awkward transitions near the garage. The homeowner wanted a more consistent route that retained the existing curve while improving the connection between the slope and the home.

Preparation

The existing surface was removed and the curved approach was excavated to the planned profile. Gravel was placed and compacted along the full route. Curved formwork established the driveway outline, while measured elevations guided drainage and the transition at the garage. Forms were braced along the radius to hold their alignment during placement. The base was prepared to the perimeter, including the narrower inside edges of the curved approach.

Construction details

Reinforcement was placed within the prepared driveway before concrete placement. The surface was shaped to follow the planned curve and changing elevations, then given a broom finish. Control joints were arranged around the driveway geometry. Curing and temporary access restrictions followed the completed finishing work. The reinforcement was supported above the prepared base. Concrete was worked into the curved edges, and the finishing sequence maintained the planned profile without leaving excess material at slope transitions.

Finished result

The finished driveway follows the sweeping route toward the hillside home. Light gray concrete and a restrained surface texture give the approach a consistent appearance, while the curved perimeter remains the defining feature of the completed driveway.

Cost range for comparable work

The 2026 guide range for comparable work is $18,500 to $40,700 or more, with a typical benchmark of $27,750 at $15 per sq ft. The calculation uses 1,850 sq ft at $10, $15, and $22 or more per sq ft. Curved formwork, changing grades, access for removal equipment and concrete delivery, base preparation, and the length of the approach influence the price. Garage transitions require additional layout attention.

View the 2026 cost guide

Care and maintenance

Follow the written curing and return to traffic instructions. Keep water moving away from the house and driveway edges, maintain the joints, and use snow removal methods appropriate for the surface.

Case study 03

Brown toned driveway at a two story home

Neighborhood
Briargate, Colorado Springs
Completion date
August 2024
Square footage
900 sq ft
Project type
Concrete driveway replacement
Brown-tinted concrete driveway at a two-story Colorado Springs home.
Brown-tinted concrete driveway at a two-story Colorado Springs home. A completed Driveway King project in Colorado Springs, Colorado.View gallery image 03

Original problem

The original gray driveway had a tired appearance and scattered surface deterioration. The homeowner wanted replacement concrete that complemented the two story home and introduced a warmer color without changing the basic residential layout.

Preparation

The existing driveway was removed and the exposed ground was checked for loose areas. Gravel was installed and compacted to support the replacement slab. Formwork preserved the approach dimensions, with elevations set to carry surface water away from the garage. The color selection and finish sequence were settled before placement. Forms were braced, adjacent finishes were protected from splashes, and the prepared base was cleared of loose debris.

Construction details

Reinforcement was installed before brown toned concrete was placed within the forms. The surface received a consistent texture suited to vehicle use, and edges were finished around the garage approach. Control joints were installed to match the slab layout. Curing followed the selected decorative finish system. The reinforcement was supported in position, and the surface was worked without adding unnecessary water during finishing. Concrete was consolidated at the forms before edges and decorative surface treatment were completed.

Finished result

The brown toned driveway introduces a warmer surface beneath the two story facade. The completed approach retains a familiar residential shape while making the concrete color part of the home exterior and the overall view from the street.

Cost range for comparable work

The 2026 guide range for comparable work is $9,000 to $19,800 or more, with a typical benchmark of $13,500 at $15 per sq ft. The calculation uses 900 sq ft at $10, $15, and $22 or more per sq ft. Total area, removal quantities, base correction, color selection, and the chosen decorative finish influence this project type. Consistent treatment across the full approach requires coordination during placement and finishing.

View the 2026 cost guide

Care and maintenance

Follow the care schedule for the selected decorative finish and sealer. Keep irrigation and gutter discharge from saturating the edges, and use snow removal methods that protect the surface texture.

Case study 04

Curved driveway with a decorative border

Neighborhood
Kissing Camels, Colorado Springs
Completion date
July 2025
Square footage
1,450 sq ft
Project type
Concrete driveway replacement
Curved gray concrete driveway with a decorative border and landscaping in Colorado Springs.
Curved gray concrete driveway with a decorative border and landscaping. A completed Driveway King project in Colorado Springs, Colorado.View gallery image 04

Original problem

The previous driveway had a plain layout with deteriorated edges along the landscaping. The homeowner wanted a curved replacement approach with a decorative border that gave the driveway a more deliberate connection to the surrounding property.

Preparation

The existing surface was removed while adjacent planting areas were protected. Excavation established the new curved outline. Compacted gravel supported the main driveway and border areas. Formwork separated the decorative sections, and elevations were checked to establish the intended drainage pattern. The border dimensions were marked before the forms were secured. Base preparation extended beneath the border, and separate materials were organized to keep the field and edge treatments distinct.

Construction details

Reinforcement was placed before the main gray concrete field and contrasting decorative border were constructed. Finishing emphasized a consistent driving surface and defined edges along the curve. Control joints were coordinated with the border layout. Curing and access restrictions protected the completed work during its initial strength development. Concrete was worked along the border forms before edge finishing. The interfaces between the decorative perimeter and main driveway were completed to the planned elevations, with reinforcement supported throughout placement.

Finished result

The finished driveway combines a simple gray driving surface with a defined decorative perimeter. The curved layout and contrasting border give the approach a distinct outline beside the landscaping, creating a coordinated connection between the driveway and property.

Cost range for comparable work

The 2026 guide range for comparable work is $14,500 to $31,900 or more, with a typical benchmark of $21,750 at $15 per sq ft. The calculation uses 1,450 sq ft at $10, $15, and $22 or more per sq ft. Border dimensions, decorative materials, curved formwork, excavation access, base corrections, and driveway area influence pricing. The amount of separate edge detailing affects the labor needed to complete the design.

View the 2026 cost guide

Care and maintenance

Follow the written curing and return to traffic instructions. Keep water moving away from the house and driveway edges, maintain the joints, and use snow removal methods appropriate for the surface.

Case study 05

Large driveway with a square decorative inset

Neighborhood
Flying Horse, Colorado Springs
Completion date
September 2024
Square footage
2,200 sq ft
Project type
Concrete driveway replacement
Large concrete driveway with a square decorative inset at an upscale home in Colorado Springs.
Large concrete driveway with a square decorative inset at an upscale home. A completed Driveway King project in Colorado Springs, Colorado.View gallery image 05

Original problem

The broad driveway needed replacement after uneven wear across the main approach. The homeowner also wanted the new surface to have a focal point that related to the home without making the entire driveway visually busy.

Preparation

The old driveway was removed and the full footprint was excavated to the planned elevations. Gravel was compacted in layers across the approach. Formwork established the main edges and square inset, while drainage and the garage connection were checked before placement. The inset corners were marked and its forms secured before the main placement. Base preparation extended beneath the feature, with loose material removed from both the inset and surrounding field.

Construction details

Reinforcement was positioned throughout the prepared concrete sections. The main driveway received a simple textured finish, with a contrasting square concrete inset creating the decorative feature. Control joints were coordinated with the inset and surrounding panels. The completed surface was cured and protected from early vehicle traffic. The concrete was worked into the inset corners without displacing its forms. Adjacent finished sections were protected while the feature was completed, and the interface was finished to the planned surface elevations.

Finished result

The square inset gives the large driveway a clear focal point. The surrounding concrete remains visually simple, allowing the geometric feature to add definition without covering the entire approach in a decorative pattern or competing with the home.

Cost range for comparable work

The 2026 guide range for comparable work is $22,000 to $48,400 or more, with a typical benchmark of $33,000 at $15 per sq ft. The calculation uses 2,200 sq ft at $10, $15, and $22 or more per sq ft. The broad footprint, inset material and size, additional forming, joint coordination, base conditions, and concrete delivery access influence pricing. Decorative work adds cost beyond the surrounding standard driveway surface.

View the 2026 cost guide

Care and maintenance

Follow the written curing and return to traffic instructions. Keep water moving away from the house and driveway edges, maintain the joints, and use snow removal methods appropriate for the surface.

Case study 06

Dark gray driveway at a landscaped home

Neighborhood
Pine Creek, Colorado Springs
Completion date
May 2025
Square footage
1,100 sq ft
Project type
Concrete driveway replacement
Fresh dark-gray broom-finished concrete driveway at a landscaped home in Colorado Springs.
Fresh dark-gray broom-finished concrete driveway at a landscaped home. A completed Driveway King project in Colorado Springs, Colorado.View gallery image 06

Original problem

The existing driveway had surface wear and irregular edges beside established landscaping. The homeowner wanted a straightforward replacement that created a consistent garage approach while keeping the surrounding planting beds and landscape layout intact.

Preparation

The old concrete was removed without expanding the driveway into the planting beds. Exposed ground was checked, and gravel was placed and compacted in layers. Formwork defined the landscape edges, with elevations set to direct water along the planned surface drainage route. The landscape boundary was marked before equipment entered the work area. Forms were braced against movement, and base preparation reached the slab perimeter beside the planting beds.

Construction details

Reinforcement was set before placement of the replacement concrete. A broom finish provided a consistent surface texture, and the edges were completed beside the landscaping. Control joints divided the approach into planned panels. Curing followed finishing, with vehicle access delayed until the specified return to service time. Concrete was worked along the forms before edge finishing, with reinforcement held on supports during placement. Adjacent planting beds were kept clear of excess concrete and construction debris during cleanup.

Finished result

The completed driveway has a consistent broom texture and defined edges beside the planted landscape. The photograph captures a dark gray appearance at that moment, with the surrounding beds continuing to frame the approach and connect it visually to the home.

Cost range for comparable work

The 2026 guide range for comparable work is $11,000 to $24,200 or more, with a typical benchmark of $16,500 at $15 per sq ft. The calculation uses 1,100 sq ft at $10, $15, and $22 or more per sq ft. Protection of planting beds, removal access, base repair, total driveway area, edge finishing, and the garage connection influence cost. Retaining the existing footprint can reduce the amount of surrounding landscape work.

View the 2026 cost guide

Care and maintenance

Follow the written curing and return to traffic instructions. Keep water moving away from the house and driveway edges, maintain the joints, and use snow removal methods appropriate for the surface.

Case study 07

Long driveway between masonry entry pillars

Neighborhood
Broadmoor, Colorado Springs
Completion date
July 2024
Square footage
3,400 sq ft
Project type
Concrete driveway replacement
Long colored concrete estate driveway between masonry entry pillars in Colorado Springs.
Long colored concrete estate driveway between masonry entry pillars. A completed Driveway King project in Colorado Springs, Colorado.View gallery image 07

Original problem

The long entrance drive had worn pavement and uneven sections near the masonry pillars. The homeowner wanted a continuous concrete approach that respected the existing entrance features and gave the property a more consistent arrival experience.

Preparation

The old surface was removed along the entrance route, with the masonry pillars protected from equipment. Excavation corrected uneven areas before gravel placement and compaction. Formwork established consistent driveway edges, and drainage elevations were checked through the entrance and toward the home. The entrance opening was checked for delivery clearance, and the staging area was kept away from the pillars. Forms were secured through the gateway before the placement began.

Construction details

Reinforcement was installed along the prepared route before colored concrete was placed in planned sections. Finishing maintained a consistent texture through the entrance. Control joints followed the driveway layout, with separation at existing masonry features. Curing measures and temporary vehicle restrictions protected the newly completed concrete approach. Reinforcement supports held the steel in position during placement. Concrete splashes were kept off adjacent masonry, and the driveway perimeter was finished around the fixed entrance structures before the area was cleaned.

Finished result

The finished colored concrete approach extends through the masonry entrance and continues toward the residence. Its consistent surface treatment gives the long driveway a unified appearance, while the existing pillars remain the defining architectural features at the property entrance.

Cost range for comparable work

The 2026 guide range for comparable work is $34,000 to $74,800 or more, with a typical benchmark of $51,000 at $15 per sq ft. The calculation uses 3,400 sq ft at $10, $15, and $22 or more per sq ft. Driveway length, total area, color treatment, gate opening access, masonry protection, removal quantities, and base correction influence pricing. Delivery planning becomes more significant when the work extends far into the property.

View the 2026 cost guide

Care and maintenance

Follow the care schedule for the selected decorative finish and sealer. Keep irrigation and gutter discharge from saturating the edges, and use snow removal methods that protect the surface texture.

Case study 08

Broad estate driveway with autumn landscaping

Neighborhood
Broadmoor Bluffs, Colorado Springs
Completion date
June 2025
Square footage
2,600 sq ft
Project type
Concrete driveway replacement
Broad concrete estate driveway framed by autumn landscaping in Colorado Springs.
Broad concrete estate driveway framed by autumn landscaping. A completed Driveway King project in Colorado Springs, Colorado.View gallery image 08

Original problem

The expansive approach had aging concrete and an inconsistent surface near the home. The homeowner wanted a uniform replacement that accommodated everyday vehicle movements and fit within the established estate landscaping without unnecessary changes to the driveway footprint.

Preparation

The previous concrete was removed across the agreed footprint. Landscape edges were protected while the exposed ground was evaluated and soft areas were corrected. Gravel was compacted in layers, and formwork established the broad approach with planned drainage toward suitable discharge areas. Delivery access and material staging were arranged before the base was completed. Forms were secured across wider sections, and the prepared surface was cleared before reinforcement placement.

Construction details

Reinforcement was installed before the driveway was poured in a coordinated placement sequence. The broad concrete surface received a consistent broom finish, with edges completed along the landscaping. Control joints followed the slab geometry and vehicle approach. Curing began after finishing, and the driveway remained closed during initial curing. The steel was held on supports while concrete was placed across the broad approach. Finishers worked along the formed perimeter before completing the main surface, and construction debris was removed from adjoining areas.

Finished result

The completed estate approach presents a broad, uniform concrete surface framed by the surrounding landscaping. The simple finish suits the scale of the driveway, and the continuous layout keeps the connection to the home visually clear across the large footprint.

Cost range for comparable work

The 2026 guide range for comparable work is $26,000 to $57,200 or more, with a typical benchmark of $39,000 at $15 per sq ft. The calculation uses 2,600 sq ft at $10, $15, and $22 or more per sq ft. Overall area, removal and hauling quantities, concrete placement access, base conditions, and the extent of perimeter finishing influence cost. Wider approaches require coordinated delivery and finishing across the full driveway.

View the 2026 cost guide

Care and maintenance

Keep leaves, landscape material, and irrigation from collecting against the driveway edges. Maintain clear runoff paths and follow the written curing, snow removal, and joint maintenance instructions.

Case study 09

Rural driveway in the foothills

Neighborhood
Cedar Heights, Colorado Springs
Completion date
August 2025
Square footage
3,600 sq ft
Project type
New concrete driveway installation
Long rural concrete driveway in the foothills near Colorado Springs.
Long rural concrete driveway in the foothills near Colorado Springs. A completed Driveway King project in Colorado Springs, Colorado.View gallery image 09

Original problem

The long approach had a loose gravel surface that developed ruts and tracked material toward the home. The homeowner wanted a more stable driveway that maintained the foothill route and reduced the need for repeated surface reshaping.

Preparation

Loose surface material was removed and the driveway route was excavated to the planned profile. The exposed ground was evaluated along its length. Gravel was added and compacted in layers, while formwork established the edges and guided drainage around changes in the terrain. Material staging was arranged to limit repeated vehicle movement over the prepared base. Forms were braced through terrain changes, and disturbed base areas were corrected before reinforcement placement.

Construction details

Reinforcement was positioned before concrete was placed along the prepared approach in planned sections. A broom finish provided a consistent texture across the long route. Control joints followed the driveway geometry and placement sequence. The completed concrete was cured, with construction traffic kept off the surface during initial curing. The reinforcement was supported above the base during placement. Concrete was worked to the formed edges along the route, and vehicles were directed away from completed sections while remaining work continued.

Finished result

The finished concrete driveway provides a continuous approach through the foothill property. Its long, simple surface defines the route to the residence and gives the entrance a more established appearance within the open landscape surrounding the home.

Cost range for comparable work

The 2026 guide range for comparable work is $28,800 to $72,000 or more, with a typical benchmark of $43,200 at $12 per sq ft. The calculation uses 3,600 sq ft at $8, $12, and $20 or more per sq ft. Length, total area, access along the route, variations in supporting ground, excavation needs, base quantities, and delivery logistics influence cost. Rural approaches can involve more preparation beyond the immediate garage area.

View the 2026 cost guide

Care and maintenance

Keep leaves, landscape material, and irrigation from collecting against the driveway edges. Maintain clear runoff paths and follow the written curing, snow removal, and joint maintenance instructions.

Case study 10

Multitone driveway at a hillside home

Neighborhood
Peregrine, Colorado Springs
Completion date
September 2024
Square footage
2,400 sq ft
Project type
Concrete driveway replacement
Sweeping multi-tone concrete driveway at a hillside custom home in Colorado Springs.
Sweeping multi-tone concrete driveway at a hillside custom home. A completed Driveway King project in Colorado Springs, Colorado.View gallery image 10

Original problem

The original hillside driveway had aging concrete and a plain appearance beside the custom home. The homeowner wanted a sweeping replacement layout with contrasting tones while retaining a practical approach across the changing elevations.

Preparation

The existing driveway was removed and the slope was excavated to the planned profile. Compacted gravel established support beneath the full approach. Curved formwork defined the driveway and decorative sections, while elevations were checked for drainage and vehicle clearance at the transitions. The color divisions were marked before forms were secured. Adjacent finishes were protected, and materials for each decorative section were organized before the concrete placement began.

Construction details

Reinforcement was set before the concrete was placed within the curved forms. Contrasting concrete tones distinguished selected areas while the surface texture remained consistent for vehicle use. Control joints were coordinated with the decorative divisions. Curing followed the finish requirements, with the approach closed to vehicles during initial curing. Reinforcement was supported in position while each section was placed. Finished decorative areas were protected during work on adjoining sections, with particular attention to keeping excess concrete off the completed color treatments.

Finished result

The completed driveway combines broad curves with contrasting concrete tones at the hillside home. The decorative divisions give the approach additional definition while the sweeping layout remains clear, bringing the driveway into the overall design of the property exterior.

Cost range for comparable work

The 2026 guide range for comparable work is $24,000 to $52,800 or more, with a typical benchmark of $36,000 at $15 per sq ft. The calculation uses 2,400 sq ft at $10, $15, and $22 or more per sq ft. Changing grades, curved formwork, multiple finish areas, color selections, delivery access, and base preparation influence pricing. Coordinating the decorative design with the driveway profile adds layout and finishing work.

View the 2026 cost guide

Care and maintenance

Follow the care schedule for the selected decorative finish and sealer. Keep irrigation and gutter discharge from saturating the edges, and use snow removal methods that protect the surface texture.

Case study 11

Light gray driveway through autumn trees

Neighborhood
Mountain Shadows, Colorado Springs
Completion date
October 2025
Square footage
2,350 sq ft
Project type
Concrete driveway replacement
Long light-gray concrete driveway through autumn trees in Colorado Springs.
Long light-gray concrete driveway through autumn trees. A completed Driveway King project in Colorado Springs, Colorado.View gallery image 11

Original problem

The tree lined driveway had deteriorated pavement and an uneven surface along the extended approach. The homeowner wanted a simple light gray concrete replacement that preserved the existing route and worked with the mature landscape.

Preparation

The previous surface was removed along the agreed route, with access arranged around the trees. Excavation exposed the supporting ground for evaluation. Gravel was compacted in layers, and formwork established continuous edges with elevations planned for drainage along the length of the drive. Delivery and debris handling were arranged within the working route. Forms were braced, loose material was cleared from the base, and disturbed sections were corrected before reinforcement placement.

Construction details

Reinforcement was placed before light gray concrete was installed through the prepared approach. A broom finish created a uniform surface without adding decorative color. Control joints followed the long driveway layout. The concrete received appropriate curing protection, and vehicles were kept off the new surface during the initial curing period. Supports held the reinforcement in position during placement. Finishers worked the perimeter before completing the surface, and the curing surface was protected from drying conditions while the surrounding work area was cleaned.

Finished result

The finished light gray driveway creates a simple approach through the tree lined property. Its consistent surface and defined perimeter remain visually restrained against the autumn landscape shown in the photograph, allowing the surrounding trees to frame the route.

Cost range for comparable work

The 2026 guide range for comparable work is $23,500 to $51,700 or more, with a typical benchmark of $35,250 at $15 per sq ft. The calculation uses 2,350 sq ft at $10, $15, and $22 or more per sq ft. Driveway length, removal quantities, tree protection, equipment access, base conditions, and concrete delivery arrangements influence the price. A long wooded route requires careful coordination beyond the immediate garage approach.

View the 2026 cost guide

Care and maintenance

Keep leaves, landscape material, and irrigation from collecting against the driveway edges. Maintain clear runoff paths and follow the written curing, snow removal, and joint maintenance instructions.

Case study 12

Colored driveway at a rural estate

Neighborhood
Broadmoor, Colorado Springs
Completion date
August 2024
Square footage
3,200 sq ft
Project type
Concrete driveway replacement
Large colored concrete driveway at a rural estate near Colorado Springs.
Large colored concrete driveway at a rural estate near Colorado Springs. A completed Driveway King project in Colorado Springs, Colorado.View gallery image 12

Original problem

The large estate approach had a worn surface and inconsistent appearance near the residence. The homeowner wanted a replacement driveway that combined dependable vehicle access with a colored finish suited to the scale and exterior of the home.

Preparation

The old approach was removed and the full driveway footprint was excavated to the intended profile. Loose ground was corrected before gravel placement and compaction. Formwork established the broad edges, while drainage elevations and concrete delivery access were coordinated before construction. A staging area was established before the base was completed. Forms were secured around the wider sections, and the color selection was coordinated with concrete delivery and finishing.

Construction details

Reinforcement was installed across the prepared driveway before colored concrete was placed in planned sections. The finish provided a consistent texture throughout the broad approach. Control joints were arranged around the driveway shape and placement sequence. Curing followed the color system requirements, with the completed surface protected from early traffic. The reinforcement was supported during placement, and adjacent property finishes were protected from concrete splashes. Finishers worked the formed edges before completing the decorative surface.

Finished result

The completed colored driveway gives the estate a broad, coordinated approach. The finish makes the concrete part of the exterior design, while the continuous layout carries the driveway across the open property setting toward the residence and its garage access.

Cost range for comparable work

The 2026 guide range for comparable work is $32,000 to $70,400 or more, with a typical benchmark of $48,000 at $15 per sq ft. The calculation uses 3,200 sq ft at $10, $15, and $22 or more per sq ft. The large footprint, decorative color, material quantities, delivery access, removal scope, and base preparation influence project cost. Maintaining a coordinated finish across a broad approach adds planning and placement complexity.

View the 2026 cost guide

Care and maintenance

Follow the care schedule for the selected decorative finish and sealer. Keep irrigation and gutter discharge from saturating the edges, and use snow removal methods that protect the surface texture.

Case study 13

Decorative paneled driveway at a stone home

Neighborhood
Kissing Camels, Colorado Springs
Completion date
May 2025
Square footage
1,650 sq ft
Project type
Concrete driveway replacement
Decorative paneled concrete driveway at a stone-clad home in Colorado Springs.
Decorative paneled concrete driveway at a stone-clad home. A completed Driveway King project in Colorado Springs, Colorado.View gallery image 13

Original problem

The original driveway had aging panels and a basic appearance that did little to complement the stone exterior. The homeowner wanted a replacement with a defined decorative panel pattern and a consistent surface for garage access.

Preparation

The existing concrete was removed and the exposed ground was evaluated. Gravel was placed and compacted beneath the new driveway footprint. Formwork established the perimeter and decorative panel divisions, with finished elevations checked against the garage threshold and the planned drainage route. The decorative divisions were marked before the forms were secured. The prepared base was cleared of debris, and nearby stonework was protected before reinforcement and concrete placement.

Construction details

Reinforcement was positioned before concrete placement within the defined panel layout. Decorative surface treatment gave the panels a coordinated appearance beside the stone exterior. The joint layout respected both the pattern and slab geometry. Curing followed finishing, and temporary barriers kept vehicles off the driveway during initial curing. The reinforcement was supported during placement, and concrete was worked into the formed panel corners. Adjacent finished sections were protected while decorative work continued, and the stone facade was kept clear of concrete splashes.

Finished result

The finished driveway presents a defined decorative panel pattern beside the stone facade. The organized surface adds detail across the approach and gives the driveway a coordinated relationship with the home exterior without relying on an entirely uniform visual field.

Cost range for comparable work

The 2026 guide range for comparable work is $16,500 to $36,300 or more, with a typical benchmark of $24,750 at $15 per sq ft. The calculation uses 1,650 sq ft at $10, $15, and $22 or more per sq ft. Panel layout, decorative treatment, additional forming, finish selection, removal quantities, and base corrections influence cost. The number of separate decorative sections affects the work needed to execute a consistent pattern.

View the 2026 cost guide

Care and maintenance

Follow the care schedule for the selected decorative finish and sealer. Keep irrigation and gutter discharge from saturating the edges, and use snow removal methods that protect the surface texture.

Case study 14

Steep driveway at a mountain home

Neighborhood
Cedar Heights, Colorado Springs
Completion date
July 2025
Square footage
1,750 sq ft
Project type
Concrete driveway replacement
Steep concrete driveway leading to a mountain home near Colorado Springs.
Steep concrete driveway leading to a mountain home near Colorado Springs. A completed Driveway King project in Colorado Springs, Colorado.View gallery image 14

Original problem

The steep approach had worn pavement and uncomfortable transitions where the slope changed. The homeowner wanted a continuous concrete driveway that followed the mountain setting while providing a more consistent surface between the road and the garage.

Preparation

The old surface was removed and the steep approach was excavated to the planned profile. Gravel was placed and compacted along the slope. Formwork controlled the driveway edges and transition elevations, with drainage and vehicle clearance checked before the concrete placement began. Forms were securely braced along the slope before placement. The base was checked at transition points, and disturbed material was corrected before the reinforcement was installed.

Construction details

Reinforcement was installed within the prepared approach before concrete placement. The surface was shaped through the changes in grade and given a broom finish for texture. Control joints followed the driveway geometry. Curing protection and temporary barriers kept vehicles off the steep surface during the initial curing period. The steel was held in position on supports during placement. Concrete was worked against the forms without flattening the planned slope transitions, and the surface received curing protection after the finishing work.

Finished result

The completed concrete driveway follows the steep route toward the mountain home. The surface texture and continuous profile give the approach a consistent appearance through the grade changes, with the slope remaining the defining characteristic of the finished driveway.

Cost range for comparable work

The 2026 guide range for comparable work is $17,500 to $38,500 or more, with a typical benchmark of $26,250 at $15 per sq ft. The calculation uses 1,750 sq ft at $10, $15, and $22 or more per sq ft. The steep profile, equipment access, concrete placement method, base preparation, formwork, and transition detailing influence pricing. Work on changing grades requires more layout attention than a straightforward flat residential approach.

View the 2026 cost guide

Care and maintenance

Follow the written curing and return to traffic instructions. Keep water moving away from the house and driveway edges, maintain the joints, and use snow removal methods appropriate for the surface.

Case study 15

Concrete driveway at a newly built home

Neighborhood
Cordera, Colorado Springs
Completion date
June 2024
Square footage
950 sq ft
Project type
New construction driveway
Freshly placed concrete driveway at a newly built home in Colorado Springs.
Freshly placed concrete driveway at a newly built home. A completed Driveway King project in Colorado Springs, Colorado.View gallery image 15

Original problem

The newly built home had an unfinished driveway approach with exposed soil and temporary construction access. The homeowner needed a permanent concrete connection to the garage, coordinated with the new home elevations and planned landscaping.

Preparation

Temporary construction material was removed and the driveway footprint was excavated to the planned depth and elevations. The ground was evaluated before gravel placement and compaction. Formwork established the approach, with drainage checked against the garage threshold and future landscape grades. Equipment staging was coordinated with the remaining exterior work. Forms were braced before placement, and construction debris was cleared from the base so reinforcement could be installed on supports.

Construction details

Reinforcement was positioned before new concrete was placed within the formed approach. The driveway received a broom finish and finished edges at the surrounding grade. Control joints were installed according to the slab layout. Curing began after finishing, with access coordinated to keep remaining construction vehicles off the fresh concrete. Concrete was worked against the garage approach forms before edge finishing. The reinforcement remained supported during placement, and temporary construction access was redirected to protect the completed surface while other site work continued.

Finished result

The completed driveway gives the new home a permanent concrete approach to the garage. Its simple broom finish fits the residential setting, and the formed outline establishes clear driveway boundaries as the surrounding property moves from construction toward everyday use.

Cost range for comparable work

The 2026 guide range for comparable work is $7,600 to $17,100 or more, with a typical benchmark of $10,450 at $11 per sq ft. The calculation uses 950 sq ft at $8, $11, and $18 or more per sq ft. New site excavation, ground conditions, base preparation, total driveway area, construction access, and coordination with other exterior work influence cost. Remaining building activity can also affect the concrete placement sequence.

View the 2026 cost guide

Care and maintenance

Follow the written curing and return to traffic instructions. Keep water moving away from the house and driveway edges, maintain the joints, and use snow removal methods appropriate for the surface.

Case study 16

Concrete driveway at a residential garage

Neighborhood
Briargate, Colorado Springs
Completion date
September 2025
Square footage
780 sq ft
Project type
Concrete driveway replacement
Fresh smooth concrete driveway at a Colorado Springs residential garage.
Fresh smooth concrete driveway at a Colorado Springs residential garage. A completed Driveway King project in Colorado Springs, Colorado.View gallery image 16

Original problem

The garage approach had cracked concrete and an uneven transition near the entrance. The homeowner wanted a replacement driveway that provided a consistent daily access surface and tied neatly into the existing residential garage.

Preparation

The old driveway concrete was removed while the garage threshold and adjacent surfaces were protected. Exposed ground was checked before gravel placement and compaction. Formwork established the driveway limits, with elevations set to manage drainage and create the planned connection at the garage. The garage edge was protected before excavation. Forms were braced along the approach, and the base was prepared to the slab boundary rather than leaving loose material near the threshold.

Construction details

Reinforcement was installed before concrete was placed and finished with a broom texture. The work included a defined separation from the existing garage structure and carefully finished driveway edges. Control joints followed the approach layout. Curing and temporary vehicle restrictions protected the replacement slab during the initial curing period. The reinforcement was held on supports during placement. Concrete was worked along the garage approach forms before finishing, and the connection to existing concrete was completed without filling the planned separation at the structure.

Finished result

The completed driveway creates a defined concrete approach to the residential garage. The simple broom texture and coordinated perimeter keep the surface practical in appearance, while the garage connection remains the central feature of this everyday access route.

Cost range for comparable work

The 2026 guide range for comparable work is $7,800 to $17,160 or more, with a typical benchmark of $11,700 at $15 per sq ft. The calculation uses 780 sq ft at $10, $15, and $22 or more per sq ft. Total area, removal access near the garage, threshold detailing, base correction, perimeter formwork, and concrete placement access influence pricing. Existing structures can limit working room even on a modest residential driveway.

View the 2026 cost guide

Care and maintenance

Follow the written curing and return to traffic instructions. Keep water moving away from the house and driveway edges, maintain the joints, and use snow removal methods appropriate for the surface.

Case study 17

Driveway replacement at a masonry home

Neighborhood
Old Colorado City, Colorado Springs
Completion date
May 2024
Square footage
620 sq ft
Project type
Concrete driveway replacement
New concrete driveway replacement at a masonry home in Colorado Springs.
New concrete driveway replacement at a masonry home. A completed Driveway King project in Colorado Springs, Colorado.View gallery image 17

Original problem

The existing concrete driveway had worn panels and broken edges beside the masonry home. The homeowner wanted the damaged approach replaced within its existing footprint, with a simple finish that suited the older property.

Preparation

The failed concrete was removed while nearby masonry and adjacent surfaces were protected. The exposed ground was evaluated and loose areas were corrected. Gravel was compacted beneath the replacement footprint, and formwork established finished edges with elevations planned to carry water away from the home. Equipment staging was kept clear of the masonry wall. Forms were secured within the existing footprint, and loose debris was removed from the prepared base before reinforcement placement.

Construction details

Reinforcement was positioned before the replacement concrete was placed. A broom finish kept the new driveway visually simple, with defined edges beside the masonry property. Control joints divided the slab into planned panels, and separation was maintained at existing structures. Curing and temporary access restrictions followed the finishing work. Supports held the steel in position during placement. Nearby masonry was protected from splashes, and concrete was worked into the formed perimeter before finishing the surface and cleaning the adjoining residential access route.

Finished result

The replacement driveway gives the masonry home a simple new concrete approach within the existing footprint. Its restrained surface texture and defined panels fit the established property, with finished edges marking the connection between the driveway and adjacent residential features.

Cost range for comparable work

The 2026 guide range for comparable work is $6,200 to $13,640 or more, with a typical benchmark of $9,300 at $15 per sq ft. The calculation uses 620 sq ft at $10, $15, and $22 or more per sq ft. Removal conditions, access beside the home, protection of masonry, base repair, driveway area, and connections to existing surfaces influence cost. A smaller footprint can still require detailed preparation near older structures.

View the 2026 cost guide

Care and maintenance

Follow the written curing and return to traffic instructions. Keep water moving away from the house and driveway edges, maintain the joints, and use snow removal methods appropriate for the surface.

Case study 18

Broad driveway at a home with solar panels

Neighborhood
Pine Creek, Colorado Springs
Completion date
August 2025
Square footage
1,800 sq ft
Project type
Concrete driveway replacement
Broad residential concrete driveway at a solar-equipped Colorado Springs home.
Broad residential concrete driveway at a solar-equipped Colorado Springs home. A completed Driveway King project in Colorado Springs, Colorado.View gallery image 18

Original problem

The broad driveway had uneven wear across the garage approach and deteriorated edges near the yard. The homeowner wanted a uniform replacement that preserved the useful width and complemented the home with its rooftop solar panels.

Preparation

The previous driveway was removed across the planned footprint. The supporting ground was evaluated, and gravel was placed and compacted in layers. Formwork maintained the broad approach while setting consistent edges, with drainage elevations checked at the garage and surrounding landscape. Delivery access was arranged before the wider base sections were completed. Forms were braced along the perimeter, and loose material was removed before the reinforcement was set on supports.

Construction details

Reinforcement was installed before the broad concrete approach was placed in a coordinated sequence. A broom finish provided a consistent texture across the driveway. Control joints followed the slab geometry, and edges were finished at the surrounding grade. Curing protection and a temporary vehicle closure completed the installation sequence. The reinforcement stayed supported during placement across the wider sections. Concrete was worked along the forms before the surface was finished, and adjoining yard areas were cleared of excess material during the final cleanup.

Finished result

The completed driveway preserves the broad approach in front of the home. A consistent concrete surface and defined edges give the property a renewed driveway appearance, with the rooftop solar panels remaining a recognizable feature in the background of the photograph.

Cost range for comparable work

The 2026 guide range for comparable work is $18,000 to $39,600 or more, with a typical benchmark of $27,000 at $15 per sq ft. The calculation uses 1,800 sq ft at $10, $15, and $22 or more per sq ft. The broad area, removal quantities, base conditions, perimeter length, concrete delivery access, and finishing sequence influence cost. Wider sections require joint planning and coordinated placement across the entire driveway footprint.

View the 2026 cost guide

Care and maintenance

Follow the written curing and return to traffic instructions. Keep water moving away from the house and driveway edges, maintain the joints, and use snow removal methods appropriate for the surface.

Case study 19

Gray driveway with a curved apron

Neighborhood
Mountain Shadows, Colorado Springs
Completion date
July 2024
Square footage
1,250 sq ft
Project type
Concrete driveway replacement
Fresh gray concrete driveway with a curved residential apron in Colorado Springs.
Fresh gray concrete driveway with a curved residential apron. A completed Driveway King project in Colorado Springs, Colorado.View gallery image 19

Original problem

The existing driveway entrance had worn concrete and an awkward straight edge at the approach. The homeowner wanted a new gray concrete surface with a curved apron that made the entrance shape feel more natural.

Preparation

The old concrete was removed within the agreed scope, including the entrance area. Excavation established the curved apron footprint. Gravel was compacted beneath the driveway and apron, and curved formwork set the entrance outline while elevations were checked for drainage and street connection. The apron boundaries were marked before the curved forms were secured. Base support extended beneath the outer radius, and adjoining surfaces were protected before the concrete placement began.

Construction details

Reinforcement was positioned before gray concrete was placed within the driveway and curved apron forms. A broom finish provided texture, with edges carefully completed around the radius. Control joints followed the change in driveway shape. Curing and temporary traffic restrictions protected the approach after finishing was completed. The reinforcement was supported through the wider apron sections during placement. Concrete was worked against the curved forms before edging, and existing surface connections were completed to the planned elevations at the entrance.

Finished result

The finished gray driveway has a curved apron that gives the entrance a distinct rounded outline. The broom finished surface remains simple across the approach, allowing the change in geometry to provide the primary design detail at the driveway entrance.

Cost range for comparable work

The 2026 guide range for comparable work is $12,500 to $27,500 or more, with a typical benchmark of $18,750 at $15 per sq ft. The calculation uses 1,250 sq ft at $10, $15, and $22 or more per sq ft. Curved apron dimensions, formwork, removal scope, base corrections, connection details, and driveway area influence pricing. Any work within a public frontage can carry separate coordination and construction requirements from the private driveway.

View the 2026 cost guide

Care and maintenance

Follow the written curing and return to traffic instructions. Keep water moving away from the house and driveway edges, maintain the joints, and use snow removal methods appropriate for the surface.

Case study 20

New driveway at a white suburban home

Neighborhood
Cordera, Colorado Springs
Completion date
April 2025
Square footage
850 sq ft
Project type
Concrete driveway replacement
New concrete driveway at a white suburban home in Colorado Springs.
New concrete driveway at a white suburban home. A completed Driveway King project in Colorado Springs, Colorado.View gallery image 20

Original problem

The existing driveway had weathered concrete and an inconsistent appearance in front of the white home. The homeowner wanted a clean, simple replacement that maintained the familiar approach and improved the connection between the garage and street.

Preparation

The old driveway was removed and the exposed ground was inspected for loose material. Gravel was placed and compacted to support the replacement concrete. Formwork retained the residential approach dimensions, with finished elevations set to direct water along the planned drainage path. The garage edge and adjacent surfaces were protected before placement. Forms were braced within the existing outline, and the base was cleared of loose material before reinforcement installation.

Construction details

Reinforcement was installed before the new concrete was placed, leveled, and given a broom finish. The edges were completed along the adjoining yard and garage approach. Control joints followed the planned panel arrangement. Curing began after finishing, and vehicle access was restricted during the initial curing period. The reinforcement was held in position on supports. Concrete was worked along the forms before edge finishing, and excess material was removed from adjoining surfaces before the completed approach entered its protected curing period.

Finished result

The completed driveway gives the white suburban home a simple, consistent concrete approach. The restrained finish keeps the surface visually clean, while the defined outline and panel arrangement bring a coordinated appearance to the connection between the garage and street.

Cost range for comparable work

The 2026 guide range for comparable work is $8,500 to $18,700 or more, with a typical benchmark of $12,750 at $15 per sq ft. The calculation uses 850 sq ft at $10, $15, and $22 or more per sq ft. Removal quantities, base preparation, driveway area, access for concrete placement, edge work, and connections to existing surfaces influence pricing. A simple finish keeps decorative detailing outside the main construction scope.

View the 2026 cost guide

Care and maintenance

Follow the written curing and return to traffic instructions. Keep water moving away from the house and driveway edges, maintain the joints, and use snow removal methods appropriate for the surface.

Case study 21

Broom finish driveway with slope transitions

Neighborhood
Broadmoor Bluffs, Colorado Springs
Completion date
June 2025
Square footage
1,400 sq ft
Project type
Concrete driveway replacement
Broom-finished concrete driveway with clean slope transitions in Colorado Springs.
Broom-finished concrete driveway with clean slope transitions. A completed Driveway King project in Colorado Springs, Colorado.View gallery image 21

Original problem

The original approach had uneven transitions between slopes and a worn driving surface. The homeowner wanted a replacement driveway that handled the grade changes more consistently while keeping a straightforward broom finish for everyday vehicle access.

Preparation

The existing concrete was removed before the driveway profile was reshaped through the grade changes. Compacted gravel supported the planned transitions. Formwork established the required elevations, while drainage and vehicle clearance were checked across the full route from the entrance to the garage. Forms were braced at the transition points to hold the planned profile. The base was checked beneath those changes, with disturbed material corrected before reinforcement placement began.

Construction details

Reinforcement was set before concrete placement through the prepared changes in slope. The surface was finished to follow the planned transitions and received a consistent broom texture. Control joints were coordinated with the driveway geometry. Curing protection and temporary barriers kept vehicles off the new concrete during initial curing. Supports maintained the reinforcement position through the slope changes. Concrete was worked along the transition forms, and the finishing sequence preserved the planned surface profile before curing protection was applied across the completed approach.

Finished result

The completed approach combines a consistent broom texture with coordinated changes in slope. The photograph highlights how the driveway surface moves through the grade transitions, giving the route a clear continuous appearance between its lower and upper sections.

Cost range for comparable work

The 2026 guide range for comparable work is $14,000 to $30,800 or more, with a typical benchmark of $21,000 at $15 per sq ft. The calculation uses 1,400 sq ft at $10, $15, and $22 or more per sq ft. Grade changes, formwork, base reshaping, removal conditions, access, and transition details influence pricing. The amount of profile correction matters alongside square footage when estimating work on a driveway with several slopes.

View the 2026 cost guide

Care and maintenance

Follow the written curing and return to traffic instructions. Keep water moving away from the house and driveway edges, maintain the joints, and use snow removal methods appropriate for the surface.

Case study 22

Residential driveway beside gravel landscaping

Neighborhood
Rockrimmon, Colorado Springs
Completion date
September 2024
Square footage
1,000 sq ft
Project type
Concrete driveway replacement
Clean residential concrete driveway with gravel landscaping in Colorado Springs.
Clean residential concrete driveway with gravel landscaping. A completed Driveway King project in Colorado Springs, Colorado.View gallery image 22

Original problem

The driveway had broken edges and worn panels next to gravel landscaping. The homeowner wanted a consistent replacement surface with a clearly defined boundary that kept the concrete approach separate from the surrounding landscape material.

Preparation

The old concrete was removed and adjacent landscape gravel was temporarily pulled back from the work area. The ground was evaluated before base gravel was installed and compacted. Formwork established clear driveway edges, with elevations planned for drainage beside the existing landscaping. Landscape gravel was kept separate from the base material beneath the slab. Forms were securely braced, and loose stones were cleared from the working surface before reinforcement placement.

Construction details

Reinforcement was installed before the new concrete was placed and finished with a broom texture. The driveway edges were completed against the planned landscape boundary. Control joints divided the surface into the intended panels. Curing and temporary access restrictions followed, with landscape gravel returned after the edge work was complete. The reinforcement was held on supports during placement. Concrete was worked against the forms before edge finishing, and the final cleanup removed excess concrete before the landscape gravel was reset beside the completed perimeter.

Finished result

The finished driveway creates a clear concrete boundary beside the gravel landscaping. The broom texture and defined panels keep the approach simple, while the completed edges make the relationship between the driveway surface and surrounding landscape material easy to see.

Cost range for comparable work

The 2026 guide range for comparable work is $10,000 to $22,000 or more, with a typical benchmark of $15,000 at $15 per sq ft. The calculation uses 1,000 sq ft at $10, $15, and $22 or more per sq ft. Gravel relocation, removal quantities, base correction, driveway area, perimeter formwork, and final landscape edge work influence pricing. Keeping existing landscape material organized during construction also affects access and site preparation.

View the 2026 cost guide

Care and maintenance

Keep leaves, landscape material, and irrigation from collecting against the driveway edges. Maintain clear runoff paths and follow the written curing, snow removal, and joint maintenance instructions.

Case study 23

Broom finish and control joint detail

Neighborhood
Briargate, Colorado Springs
Completion date
June 2024
Square footage
1,050 sq ft
Project type
Concrete driveway replacement
Close view of a broom-finished concrete driveway and control joints in Colorado Springs.
Close view of a broom-finished concrete driveway and control joints. A completed Driveway King project in Colorado Springs, Colorado.View gallery image 23

Original problem

The full driveway had worn concrete and an inconsistent panel layout. The homeowner wanted a replacement with an even broom texture and a deliberate joint pattern, represented here by a close view of the finished surface.

Preparation

The old driveway was removed across the full footprint. The exposed ground was evaluated before gravel placement and compaction. Formwork established the replacement perimeter, with elevations set for drainage and the proposed control joint layout reviewed before concrete placement began. The joint layout was marked before placement, and the forms were braced. The prepared base was cleared of loose material before reinforcement was installed on supports.

Construction details

Reinforcement was installed before the replacement concrete was placed and finished with a uniform broom texture. Control joints were cut according to the planned panel layout rather than added as decoration. The completed surface was cured and protected from early traffic. Finishers completed the surface before the joint cutting sequence began. Adjacent areas were kept clear of cutting residue, and curing protection addressed the exposed surface rather than leaving the concrete unattended after the broom finish.

Finished result

The detail photograph highlights the completed broom texture and control joint treatment. It provides a closer look at the finish than a wider property view, showing two surface features within the larger residential driveway described by this project entry.

Cost range for comparable work

The 2026 guide range for comparable work is $10,500 to $23,100 or more, with a typical benchmark of $15,750 at $15 per sq ft. The calculation uses 1,050 sq ft at $10, $15, and $22 or more per sq ft. The stated area covers the complete driveway, not just the photographed detail. Removal quantities, base conditions, access, total concrete area, finishing, and joint work influence the cost of the full installation.

View the 2026 cost guide

Care and maintenance

Follow the written curing and return to traffic instructions. Keep water moving away from the house and driveway edges, maintain the joints, and use snow removal methods appropriate for the surface.

Case study 24

Brown decorative driveway at a two story home

Neighborhood
Flying Horse, Colorado Springs
Completion date
July 2025
Square footage
1,350 sq ft
Project type
Concrete driveway replacement
Brown decorative concrete driveway at a two-story home in Colorado Springs.
Brown decorative concrete driveway at a two-story home. A completed Driveway King project in Colorado Springs, Colorado.View gallery image 24

Original problem

The original driveway had aging concrete and a plain appearance beneath the two story facade. The homeowner wanted a decorative brown replacement that added warmth while retaining the existing driveway width and everyday garage access.

Preparation

The existing concrete was removed within the agreed driveway limits. Exposed ground was evaluated and gravel was installed in compacted layers. Formwork preserved the approach layout, with elevations checked for drainage and the decorative finish plan established before concrete placement. The color treatment was selected before placement. Forms were secured, the prepared base was cleared of loose material, and nearby home finishes were protected before concrete delivery.

Construction details

Reinforcement was positioned before brown decorative concrete was placed within the forms. The selected surface treatment created a consistent appearance across the residential approach. Control joints were coordinated with the decorative layout, and edges were finished around adjacent surfaces. Curing followed the chosen finish system before the driveway returned to use. The reinforcement was supported during placement, and concrete was worked along the forms before edge finishing. Finished decorative sections were protected during adjacent work, and concrete residue was removed from adjoining surfaces during cleanup.

Finished result

The finished brown decorative driveway adds a warmer concrete surface beneath the two story home. Its coordinated finish gives the approach a distinct appearance while retaining the familiar residential layout and direct connection to the existing garage.

Cost range for comparable work

The 2026 guide range for comparable work is $13,500 to $29,700 or more, with a typical benchmark of $20,250 at $15 per sq ft. The calculation uses 1,350 sq ft at $10, $15, and $22 or more per sq ft. The decorative method, color selection, driveway area, removal scope, base conditions, and access influence pricing. Coordinating the finish across the full approach adds work beyond a standard gray broom finished driveway.

View the 2026 cost guide

Care and maintenance

Follow the care schedule for the selected decorative finish and sealer. Keep irrigation and gutter discharge from saturating the edges, and use snow removal methods that protect the surface texture.

Case study 25

Broad concrete driveway and street apron

Neighborhood
Pine Creek, Colorado Springs
Completion date
August 2024
Square footage
1,600 sq ft
Project type
Concrete driveway replacement
Freshly poured broad concrete driveway and street apron in Colorado Springs.
Freshly poured broad concrete driveway and street apron. A completed Driveway King project in Colorado Springs, Colorado.View gallery image 25

Original problem

The broad driveway had worn concrete near the street and uneven panels across the residential approach. The homeowner wanted the private driveway and street connection addressed together so the finished entrance had a consistent surface and outline.

Preparation

The existing concrete was removed within the defined driveway and apron limits. Excavation exposed the ground for evaluation before gravel placement and compaction. Formwork established the broad approach and street connection, with drainage elevations coordinated across the private driveway and apron. The private driveway and apron limits were marked separately. Forms were braced at the street connection, and the prepared base was kept clear of traffic before placement.

Construction details

Reinforcement was installed according to the defined requirements for the driveway and apron sections. Concrete was placed and finished with a broom texture across the planned approach. Control joints followed the slab geometry and connection details. Curing and temporary traffic restrictions protected the completed driveway and street entrance after finishing. The reinforcement was held on supports during placement. Concrete was worked against the apron forms before edge finishing, and the interface with existing street surfaces was completed without filling planned separation or drainage features.

Finished result

The completed photograph shows the broad driveway together with its street apron. The continuous gray surface gives the entrance a coordinated appearance, while the wider view makes the relationship between the residential approach and street connection clear.

Cost range for comparable work

The 2026 guide range for comparable work is $16,000 to $35,200 or more, with a typical benchmark of $24,000 at $15 per sq ft. The calculation uses 1,600 sq ft at $10, $15, and $22 or more per sq ft. Driveway and apron area, removal quantities, base preparation, access at the street, connection details, and applicable frontage requirements influence pricing. The private driveway and public apron can require different construction scopes.

View the 2026 cost guide

Care and maintenance

Follow the written curing and return to traffic instructions. Keep water moving away from the house and driveway edges, maintain the joints, and use snow removal methods appropriate for the surface.

Case study 26

Concrete driveway panels at a mountain home

Neighborhood
Cedar Heights, Colorado Springs
Completion date
June 2024
Square footage
1,250 sq ft
Project type
Concrete driveway replacement
Concrete driveway panels at a mountain home near Colorado Springs.
Concrete driveway panels at a mountain home near Colorado Springs. A completed Driveway King project in Colorado Springs, Colorado.View gallery image 26

Original problem

The existing approach had uneven concrete panels and worn edges that interrupted the route to the garage. The project called for a consistent driveway layout suited to the sloped setting and the surrounding home exterior. Transitions between sections required attention so the replacement would read as one coordinated approach instead of a series of unrelated repairs.

Preparation

The old driveway panels were removed, and the exposed ground was excavated where additional base depth was needed. Gravel was compacted in layers. Form work established the panel layout, garage connection, and drainage direction before reinforcement was positioned for the new concrete. The panel corners were marked before formwork was braced against movement during placement. Base preparation extended to the perimeter of each section, including the connections where new panels met adjoining concrete.

Construction details

Concrete was placed within the prepared forms, leveled to the planned grades, and finished with a broom texture. The panel arrangement was coordinated with control joints and separation at adjoining structures. The concrete was worked around panel corners and finished at the transitions between sections. Particular attention went to keeping the broom texture consistent through the changes in slope and removing placement residue from adjoining surfaces. Edges were finished by hand, and curing protection remained in place before the driveway returned to vehicle use.

Finished result

The completed approach presents a series of defined concrete panels within the mountain setting. Its coordinated edges and light concrete surface bring the route to the garage together, with the panel arrangement remaining a visible part of the finished design.

Cost range for comparable work

The 2026 guide range for comparable work is $12,500 to $27,500 or more, with a typical benchmark of $18,750 at $15 per sq ft. The calculation uses 1,250 sq ft at $10, $15, and $22 or more per sq ft. Pricing depends on the number of panels replaced, access on the sloped property, removal quantities, base correction, and the effort required to coordinate elevations where the new sections meet existing surfaces.

View the 2026 cost guide

Care and maintenance

Follow the written curing and return to traffic instructions. Keep water moving away from the house and driveway edges, maintain the joints, and use snow removal methods appropriate for the surface.

Case study 27

Curved driveway beside a retaining wall

Neighborhood
Broadmoor Bluffs, Colorado Springs
Completion date
August 2024
Square footage
1,850 sq ft
Project type
Concrete driveway replacement
Curved concrete driveway beside a retaining wall and landscaping in Colorado Springs.
Curved concrete driveway beside a retaining wall and landscaping. A completed Driveway King project in Colorado Springs, Colorado.View gallery image 27

Original problem

The driveway curve had deteriorated beside the retaining wall, leaving broken edges and an irregular driving surface. The replacement needed to preserve the established route while improving the connection between the driveway, garage, and adjacent landscaping. The tight relationship between the curved driveway and the wall made perimeter alignment and construction access central parts of the scope.

Preparation

The existing concrete was removed with care around the wall and planting beds. Excavation corrected the driveway base, followed by gravel placed and compacted in layers. Curved form work established the new edges and drainage elevations, with separation planned beside the retaining wall. Equipment and removed material were kept clear of the wall. The curved formwork was braced along its length, and the working space beside the wall was maintained for placing concrete and finishing the perimeter.

Construction details

Reinforcement was positioned before concrete placement. The new surface followed the curved forms and received a broom finish. Control joints were arranged around changes in shape, and the driveway was separated from adjoining structures. Concrete was worked carefully along the narrow wall side of the approach. The curved edges were finished as part of the same sequence as the main surface, with adjacent wall faces protected from concrete residue. Curing protection and restricted vehicle access supported the concrete during its initial curing period.

Finished result

The finished driveway follows the retaining wall with a continuous curved outline. Its gray concrete surface creates a clear route beside the landscaping, bringing the wall, driveway edge, and garage approach into a coordinated residential entrance.

Cost range for comparable work

The 2026 guide range for comparable work is $18,500 to $40,700 or more, with a typical benchmark of $27,750 at $15 per sq ft. The calculation uses 1,850 sq ft at $10, $15, and $22 or more per sq ft. The curve, restricted working room beside the retaining wall, protection of landscape features, removal access, base correction, and detailed perimeter formwork all influence the price for this type of replacement.

View the 2026 cost guide

Care and maintenance

Keep leaves, landscape material, and irrigation from collecting against the driveway edges. Maintain clear runoff paths and follow the written curing, snow removal, and joint maintenance instructions.

Case study 28

Wide light colored driveway to a detached garage

Neighborhood
Pine Creek, Colorado Springs
Completion date
May 2025
Square footage
1,450 sq ft
Project type
New concrete driveway installation
Wide pale concrete driveway leading to a detached garage in Colorado Springs.
Wide pale concrete driveway leading to a detached garage. A completed Driveway King project in Colorado Springs, Colorado.View gallery image 28

Original problem

The detached garage was reached by an uneven gravel approach that tracked material toward the doors. The owner wanted a wider permanent driveway surface with enough room to approach the garage comfortably and turn vehicles without leaving the drive. The wider footprint also required a planned transition from the surrounding yard to a defined concrete approach serving the separate structure.

Preparation

Loose gravel and unsuitable surface material were excavated from the planned footprint. The ground was graded, and gravel base was compacted in layers. Form work set the driveway width and garage transition, while drainage elevations were established before reinforcement was placed. The driveway limits were marked in relation to the garage doors and vehicle approach. Formwork was braced across the wider footprint, and reinforcement was supported above the base before the concrete delivery.

Construction details

Concrete was placed across the garage approach and finished to the planned elevations. A light gray broom finish kept the appearance simple. Control joints divided the broad surface into defined sections, with separation at the garage slab. The finishing sequence covered the broad surface between the garage and outer approach. Perimeter work addressed the exposed edges beside the yard, and concrete residue was removed from the garage connection and adjacent surfaces after placement. The new driveway was protected during curing before vehicles were allowed back.

Finished result

A broad, light gray driveway now defines the approach to the detached garage. The completed surface connects the garage doors with the surrounding property and gives the separate building a substantial, clearly organized concrete entrance for everyday vehicle use.

Cost range for comparable work

The 2026 guide range for comparable work is $11,600 to $29,000 or more, with a typical benchmark of $17,400 at $12 per sq ft. The calculation uses 1,450 sq ft at $8, $12, and $20 or more per sq ft. Major price considerations include the width of the new approach, excavation and aggregate quantities, site access to the detached garage, drainage elevations, perimeter formwork, and the concrete placement area.

View the 2026 cost guide

Care and maintenance

Follow the written curing and return to traffic instructions. Keep water moving away from the house and driveway edges, maintain the joints, and use snow removal methods appropriate for the surface.

Case study 29

Light gray driveway at a two story home

Neighborhood
Briargate, Colorado Springs
Completion date
July 2024
Square footage
780 sq ft
Project type
Concrete driveway replacement
New light-gray concrete driveway at a two-story home in Colorado Springs.
New light-gray concrete driveway at a two-story home. A completed Driveway King project in Colorado Springs, Colorado.View gallery image 29

Original problem

The original driveway had cracked panels, worn surface areas, and a rough transition at the garage. The project called for a straightforward replacement that restored a consistent concrete approach without changing the basic layout of the property. The garage connection and visible front approach were priorities because both were used for daily access to the home.

Preparation

The damaged concrete was removed, and the exposed base was checked for uneven support. Local excavation made room for corrected gravel base, which was compacted in layers. Form work established the driveway edges and drainage grades before reinforcement was positioned. The removal limits were marked at adjoining concrete so the replacement had defined boundaries. The garage entrance was protected during preparation, and the formwork was braced before the surface was ready for concrete placement.

Construction details

New concrete was placed and leveled across the prepared driveway footprint. A broom finish produced a consistent light gray surface. Control joints organized the slab into regular sections, and separation was maintained at adjoining concrete. The finish work extended along both driveway edges and across the lower approach. Surface texture was kept consistent between the planned sections, with attention to the transition where the new driveway met the existing garage entrance. The driveway remained closed to vehicles while the curing process progressed.

Finished result

The completed driveway gives the two story home a simple light gray concrete approach. Regular sections and a consistent finish organize the surface, while the replacement remains within the familiar layout connecting the property entrance and garage.

Cost range for comparable work

The 2026 guide range for comparable work is $7,800 to $17,160 or more, with a typical benchmark of $11,700 at $15 per sq ft. The calculation uses 780 sq ft at $10, $15, and $22 or more per sq ft. Removal volume, access for hauling, the amount of base correction, driveway width, garage transition work, and the selected finish determine the cost of a replacement within an existing residential footprint.

View the 2026 cost guide

Care and maintenance

Follow the written curing and return to traffic instructions. Keep water moving away from the house and driveway edges, maintain the joints, and use snow removal methods appropriate for the surface.

Case study 30

Long driveway with textured decorative bands

Neighborhood
Kissing Camels, Colorado Springs
Completion date
September 2024
Square footage
2,900 sq ft
Project type
Concrete driveway replacement
Long concrete driveway with textured decorative bands in Colorado Springs.
Long concrete driveway with textured decorative bands. A completed Driveway King project in Colorado Springs, Colorado.View gallery image 30

Original problem

The long approach had an aging concrete surface and little visual definition along its length. The replacement combined a new driving surface with repeated decorative bands to give the route a more deliberate connection to the home exterior. The decorative plan needed to work with the length of the approach and avoid a disconnected pattern across the new concrete.

Preparation

The old concrete was removed, and the driveway footprint was excavated to prepare the supporting base. Gravel was compacted in layers. Form work established the edges, drainage grades, and decorative band locations, with reinforcement and joint planning coordinated around the repeating layout. The decorative bands were marked along the approach before their boundaries were formed. The band width and texture transition were reviewed with the placement sequence so the repeated detail could be carried through the entire driveway.

Construction details

The main concrete sections were placed and finished with a broom texture, while the decorative bands received a contrasting textured treatment. Control joints were coordinated with the band layout. The boundaries between plain and textured areas were completed with attention to clean, defined edges. Finishing moved through the planned bands in sequence, and adjoining completed work was protected while the next section received its surface treatment. Edges were finished, and the concrete was protected during curing before the full approach reopened to vehicle traffic.

Finished result

Textured bands give the long driveway a repeated decorative rhythm. The main concrete fields remain visually simple, while the contrasting sections add definition along the approach and connect the extended surface with the surrounding residential exterior.

Cost range for comparable work

The 2026 guide range for comparable work is $29,000 to $63,800 or more, with a typical benchmark of $43,500 at $15 per sq ft. The calculation uses 2,900 sq ft at $10, $15, and $22 or more per sq ft. The extended concrete area, number of decorative bands, texture method, additional formwork, removal access, joint coordination, and base preparation all affect pricing beyond a comparable driveway with one continuous plain finish.

View the 2026 cost guide

Care and maintenance

Follow the care schedule for the selected decorative finish and sealer. Keep irrigation and gutter discharge from saturating the edges, and use snow removal methods that protect the surface texture.

Case study 31

Long driveway with decorative paver borders

Neighborhood
Broadmoor, Colorado Springs
Completion date
June 2025
Square footage
3,100 sq ft
Project type
Concrete driveway replacement
Long concrete driveway with decorative paver borders in Colorado Springs.
Long concrete driveway with decorative paver borders. A completed Driveway King project in Colorado Springs, Colorado.View gallery image 31

Original problem

The existing driveway had weathered concrete and broken edges beside the landscaping. The owner wanted a replacement that preserved the long approach while introducing decorative paver borders to give the driveway a more defined outline. The concrete and paver work needed coordinated elevations so the borders complemented the driving surface instead of appearing as separate additions.

Preparation

Old concrete and border material were removed. Excavation created space for the concrete base and separate paver support. Aggregate was compacted in layers, and form work established drainage and slab edges. Border bedding elevations were coordinated with the planned concrete surface. Paver delivery and installation were coordinated with the concrete work so materials did not obstruct placement. The border allowance was maintained outside the slab forms, including room for bedding and edge restraint along the perimeter.

Construction details

Reinforced concrete was placed with a broom finish and control joints. After the slab work, pavers were set on prepared bedding beside the concrete, restrained at their outer edges, and filled at the joints. Cut pavers were fitted at bends and border terminations rather than forcing the pattern around those transitions. Installation kept bedding and joint material off the finished concrete, followed by cleanup along both sides of the extended approach. The concrete was protected during curing, with both materials kept out of vehicle service until ready.

Finished result

Decorative paver borders frame the long concrete driveway and give its perimeter a distinct finish. The combination creates a defined approach through the property, with the main gray surface and the smaller border units contributing different visual details.

Cost range for comparable work

The 2026 concrete comparison is $31,000 to $68,200 or more, with a typical benchmark of $46,500 at $15 per sq ft. It applies the guide rates to the listed footprint before deducting space occupied by pavers. Paver materials, bedding, edge support, and installation are priced separately from the net concrete area.

View the 2026 cost guide

Care and maintenance

Keep drainage paths clear and maintain the paver joints and concrete joints as separate systems. Address loose edge units promptly and follow the specified care instructions for each surface material.

Case study 32

Wide driveway with a decorative paver grid

Neighborhood
Flying Horse, Colorado Springs
Completion date
August 2025
Square footage
2,650 sq ft
Project type
Concrete driveway replacement
Wide concrete driveway with a decorative paver grid in Colorado Springs.
Wide concrete driveway with a decorative paver grid. A completed Driveway King project in Colorado Springs, Colorado.View gallery image 32

Original problem

The broad concrete approach had worn panels and an undifferentiated appearance across its width. The replacement introduced a decorative paver grid to break up the surface visually while retaining concrete as the main driveway material. The design required each concrete field and paver channel to fit together without losing the practical width of the garage approach.

Preparation

The existing driveway was removed, and excavation prepared the full footprint. Compacted aggregate supported the concrete sections and separate paver channels. Form work established drainage grades and grid dimensions, with reinforcement positioned in the slab sections and bedding allowances maintained for the pavers. The grid intersections were marked before individual concrete fields were formed. The widths of the paver channels were carried through each intersection, including allowances for bedding, edge support, and cuts where the grid met the perimeter.

Construction details

Concrete sections were placed within the grid layout and given a broom finish. Control joints were coordinated with the slab geometry. Pavers were installed on prepared bedding in the reserved channels, with supported edges and filled joints. Grid intersections received particular attention during paver installation so the pattern remained aligned across adjoining channels. The units were fitted at the outer boundaries, and loose bedding and joint material were removed from the completed concrete fields. Concrete curing and final surface checks preceded reopening the driveway to vehicles.

Finished result

A decorative paver grid gives the wide driveway a distinct geometric arrangement. Concrete remains the main surface, while the intersecting paver lines divide the broad approach into visible fields and add detail across the front of the home.

Cost range for comparable work

The 2026 concrete comparison is $26,500 to $58,300 or more, with a typical benchmark of $39,750 at $15 per sq ft. It applies the guide rates to the listed footprint before deducting space occupied by pavers. Paver materials, bedding, edge support, and installation are priced separately from the net concrete area.

View the 2026 cost guide

Care and maintenance

Keep drainage paths clear and maintain the paver joints and concrete joints as separate systems. Address loose edge units promptly and follow the specified care instructions for each surface material.

Case study 33

Textured driveway at an estate home

Neighborhood
Broadmoor, Colorado Springs
Completion date
October 2024
Square footage
3,400 sq ft
Project type
Concrete driveway replacement
Large textured concrete driveway at an estate home in Colorado Springs.
Large textured concrete driveway at an estate home. A completed Driveway King project in Colorado Springs, Colorado.View gallery image 33

Original problem

The estate approach had a worn driveway surface that no longer matched the surrounding home and landscape. The project called for a broad replacement with a consistent textured finish and a clearly organized layout across the full driveway. The size of the approach made finish consistency especially important because small changes in texture would be visible across the broad surface.

Preparation

Existing concrete was removed, and excavation corrected the supporting ground where needed. Gravel base was placed and compacted in layers. Form work set the perimeter and drainage elevations, while the reinforcement and control joint layout were coordinated with the large driveway footprint. The placement sequence and delivery access were established before the pour. Formwork was braced around the broad footprint, and the prepared surface was kept clear of loose material while reinforcement and finishing access were reviewed.

Construction details

Concrete was placed in a planned sequence across the broad approach. The surface received a consistent textured broom finish, with hand finished edges and control joints arranged around the driveway shape. The finishing sequence maintained the selected texture across the larger surface instead of treating each delivery as a separate visible area. Perimeter work was completed alongside the main finish, and adjoining property surfaces were cleaned of concrete residue. Separation was maintained at adjoining structures, and curing protection remained in place before the driveway returned to service.

Finished result

The completed driveway creates a broad textured approach to the estate home. Its organized sections and consistent surface treatment give the large concrete footprint a deliberate appearance, making the driveway a prominent feature of the finished property exterior.

Cost range for comparable work

The 2026 guide range for comparable work is $34,000 to $74,800 or more, with a typical benchmark of $51,000 at $15 per sq ft. The calculation uses 3,400 sq ft at $10, $15, and $22 or more per sq ft. The large footprint, removal quantities, access for concrete delivery, preparation of the supporting base, selected texture, perimeter complexity, and placement sequence are the principal pricing considerations for this estate driveway.

View the 2026 cost guide

Care and maintenance

Follow the written curing and return to traffic instructions. Keep water moving away from the house and driveway edges, maintain the joints, and use snow removal methods appropriate for the surface.

Case study 34

Newly placed driveway at a tan home

Neighborhood
Cordera, Colorado Springs
Completion date
April 2025
Square footage
850 sq ft
Project type
Concrete driveway replacement
Newly placed concrete driveway at a tan Colorado Springs home.
Newly placed concrete driveway at a tan Colorado Springs home. A completed Driveway King project in Colorado Springs, Colorado.View gallery image 34

Original problem

The original driveway had surface wear and uneven sections near the garage approach. The homeowner wanted the concrete replaced within the existing footprint, with a simple finish that suited the tan exterior and the surrounding residential streetscape. The work also needed to coordinate the new concrete with existing garage elevations and the landscape boundaries on both driveway edges.

Preparation

The old driveway was removed, and local excavation exposed the supporting ground. Gravel base was corrected and compacted in layers. Form work set the original footprint and planned drainage, with the garage connection checked before reinforcement was positioned for placement. The garage entrance and adjacent finished surfaces were protected before removal and placement work. Formwork was secured along both driveway edges, and loose preparation material was cleared from the base before the concrete was delivered.

Construction details

Concrete was placed and leveled between the garage and the lower driveway edge. A broom finish gave the surface a consistent texture. Control joints divided the replacement into planned sections, and edges were finished by hand. Finishing covered the main approach and the narrower strips along its edges within the same sequence. The driveway perimeter was completed against the existing property layout, with cleanup at the garage entrance and surrounding surfaces after placement. Curing protection and a temporary vehicle restriction supported the new concrete after placement.

Finished result

Fresh concrete gives the tan home a renewed residential approach with a simple finish and clearly organized sections. The completed driveway follows the existing footprint and presents a consistent surface between the garage and the lower approach.

Cost range for comparable work

The 2026 guide range for comparable work is $8,500 to $18,700 or more, with a typical benchmark of $12,750 at $15 per sq ft. The calculation uses 850 sq ft at $10, $15, and $22 or more per sq ft. Driveway area, demolition access, disposal quantities, base correction, garage elevations, and the amount of perimeter formwork influence pricing for this straightforward replacement with a standard broom finished concrete surface.

View the 2026 cost guide

Care and maintenance

Follow the written curing and return to traffic instructions. Keep water moving away from the house and driveway edges, maintain the joints, and use snow removal methods appropriate for the surface.

Case study 35

Stamped driveway at a Colorado Springs home

Neighborhood
Mountain Shadows, Colorado Springs
Completion date
July 2025
Square footage
1,150 sq ft
Project type
Concrete driveway replacement
Stamped concrete driveway at an upscale Colorado Springs home.
Stamped concrete driveway at an upscale Colorado Springs home. A completed Driveway King project in Colorado Springs, Colorado.View gallery image 35

Original problem

The existing plain concrete driveway had deteriorated and offered little visual connection to the home. The replacement introduced a stamped surface while keeping the approach practical for daily vehicle access and consistent with the established driveway footprint. The decorative goal required more than changing the surface appearance, since the replacement also depended on the base and finished driveway elevations.

Preparation

The old concrete was removed, and excavation prepared space for the replacement base. Gravel was compacted in layers. Form work established drainage grades and driveway edges, while reinforcement, stamp alignment, and control joint locations were coordinated before concrete placement began. Formwork was braced, adjacent surfaces were protected, and the finishing access was organized so the pattern could continue across the main fields without unnecessary interruptions.

Construction details

Concrete was placed to the planned grades and finished with the selected stamp pattern. Decorative treatment was coordinated across the surface without changing the control joint plan. The pattern was completed at the edges and around the planned joints as well as through the main driveway fields. Decorative finishing included the points where the stamp terminated, with adjacent surfaces cleaned after the surface work was complete. Edges and joints were completed, and the concrete received curing protection before the driveway returned to vehicle use.

Finished result

The finished stamped driveway adds a patterned concrete approach to the home. Its decorative surface gives the existing driveway footprint a more detailed appearance, while the edge layout and visible joints keep the overall design clearly organized.

Cost range for comparable work

The 2026 guide range for comparable work is $11,500 to $25,300 or more, with a typical benchmark of $17,250 at $15 per sq ft. The calculation uses 1,150 sq ft at $10, $15, and $22 or more per sq ft. Stamp pattern, decorative finish selection, driveway area, edge detail, joint coordination, removal requirements, and base preparation influence the price. Decorative execution adds work beyond a comparable driveway with a plain broom finish.

View the 2026 cost guide

Care and maintenance

Follow the care schedule for the selected decorative finish and sealer. Keep irrigation and gutter discharge from saturating the edges, and use snow removal methods that protect the surface texture.

Case study 36

Gray stamped driveway beside a stone facade

Neighborhood
Cedar Heights, Colorado Springs
Completion date
September 2025
Square footage
1,700 sq ft
Project type
Concrete driveway replacement
Gray stamped concrete driveway beside a stone facade in Colorado Springs.
Gray stamped concrete driveway beside a stone facade. A completed Driveway King project in Colorado Springs, Colorado.View gallery image 36

Original problem

The driveway had aged concrete and an uneven appearance beside the stone facade. The replacement called for a gray stamped finish that complemented the masonry while providing a continuous driveway surface between the property entrance and garage. The approach needed a coordinated relationship with the existing masonry without allowing the decorative pattern to override practical drainage and joint planning.

Preparation

The old driveway was removed with protection around the adjoining stonework. Excavation and gravel compaction prepared the base. Form work established the approach grades and drainage, while reinforcement, stamp orientation, and joints were arranged to suit the driveway shape and garage connection. The adjoining stonework was protected from removal debris and concrete residue. The stamp direction was established at the garage approach, and finishing access was arranged before the pour so the pattern could continue toward the outer driveway.

Construction details

Gray concrete was placed within the forms and worked to the planned elevations before stamping. The patterned finish was coordinated with control joints and separation from the house. Stamping included the narrower areas beside the masonry and the terminations at the driveway edges. Finish work kept the pattern aligned across the main fields, followed by cleanup of the adjoining stonework and protection of the completed decorative surface. Edges were completed, and curing protection was applied. A compatible sealer was included after appropriate curing, followed by reopening for vehicle access.

Finished result

Gray stamped concrete creates a textured driveway beside the home’s stone facade. The patterned surface connects visually with the masonry, while its defined perimeter and joint arrangement keep the approach organized as a complete residential driveway design.

Cost range for comparable work

The 2026 guide range for comparable work is $17,000 to $37,400 or more, with a typical benchmark of $25,500 at $15 per sq ft. The calculation uses 1,700 sq ft at $10, $15, and $22 or more per sq ft. The selected stamp and color treatment, protection of adjacent stonework, removal access, driveway area, base work, perimeter detail, and specified sealing scope all influence pricing for this decorative concrete replacement.

View the 2026 cost guide

Care and maintenance

Follow the care schedule for the selected decorative finish and sealer. Keep irrigation and gutter discharge from saturating the edges, and use snow removal methods that protect the surface texture.

Case study 37

Light gray driveway at a modern home

Neighborhood
Flying Horse, Colorado Springs
Completion date
May 2024
Square footage
1,100 sq ft
Project type
New construction driveway
Clean light-gray concrete driveway at a modern home in Colorado Springs.
Clean light-gray concrete driveway at a modern home. A completed Driveway King project in Colorado Springs, Colorado.View gallery image 37

Original problem

The newly built home had a rough construction access route with exposed soil and temporary gravel. The driveway installation needed to establish a permanent approach with clean lines that matched the modern exterior and connected smoothly to the garage. The permanent surface also needed defined elevations at the garage and clear limits between the driveway and the surrounding unfinished ground.

Preparation

Construction debris and loose surface material were removed, followed by excavation to the planned driveway depth. Gravel base was compacted in layers. Straight form work established the perimeter and drainage grades, with reinforcement positioned and the garage transition checked before placement. The formwork was braced to hold the straight perimeter during placement. The garage threshold was cleared of construction residue, and reinforcement was supported above the prepared base before the permanent approach was ready for concrete.

Construction details

Concrete was placed to the planned elevations and finished with a simple broom texture. The light gray surface followed the straight perimeter lines. Control joints were aligned with the driveway geometry, and separation was maintained at the garage. Finishing emphasized a consistent broom texture along the straight approach. The driveway edges were completed against the surrounding ground, and the connection at the garage was cleaned after placement so the new surface presented clearly beside the modern exterior. The new approach was protected during curing before it opened to vehicles.

Finished result

A light gray concrete driveway now provides the modern home with a defined permanent approach. The simple finish and straight perimeter lines relate to the contemporary exterior, giving the garage access a restrained appearance within the completed residential setting.

Cost range for comparable work

The 2026 guide range for comparable work is $8,800 to $19,800 or more, with a typical benchmark of $12,100 at $11 per sq ft. The calculation uses 1,100 sq ft at $8, $11, and $18 or more per sq ft. Pricing depends on excavation requirements, construction debris removal, aggregate base quantities, driveway area, garage transition elevations, and delivery access. The straight layout limits decorative complexity while retaining full preparation and concrete placement work.

View the 2026 cost guide

Care and maintenance

Follow the written curing and return to traffic instructions. Keep water moving away from the house and driveway edges, maintain the joints, and use snow removal methods appropriate for the surface.

Case study 38

Large colored driveway at a rural property

Neighborhood
Peregrine, Colorado Springs
Completion date
August 2024
Square footage
3,850 sq ft
Project type
New concrete driveway installation
Large colored concrete driveway at a rural property near Colorado Springs.
Large colored concrete driveway at a rural property near Colorado Springs. A completed Driveway King project in Colorado Springs, Colorado.View gallery image 38

Original problem

The long property approach had a worn gravel surface that developed ruts and required repeated maintenance. The owner wanted a permanent colored concrete driveway that suited the surrounding landscape and provided a more consistent route to the home. The scale of the route required a consistent plan for the entire approach rather than treating individual rough areas as isolated repairs.

Preparation

Loose material was removed, and excavation prepared the driveway route. The ground was graded for drainage before gravel base was placed and compacted in layers. Form work established the edges and transitions, while reinforcement and delivery access were organized for the extended placement. The delivery route and placement access were established before concrete arrived. The long perimeter was braced where needed, and the prepared base was kept clear of loose material as each portion of the driveway was readied for placement.

Construction details

Colored concrete was placed in a planned sequence along the prepared approach. A broom finish provided a consistent surface texture, and control joints followed the driveway geometry. Edges and transitions were finished by hand. Finishing followed the placement sequence along the extended route, with attention to consistency in the selected colored surface. The driveway edges and changes in width were completed within that sequence, and the adjoining ground was cleared of construction residue. The completed concrete remained protected during curing before the route reopened to normal vehicle use.

Finished result

The completed colored concrete driveway gives the rural property a substantial, defined approach. Its extended surface and consistent decorative treatment make the route a visible part of the landscape, with organized sections connecting the entrance and home.

Cost range for comparable work

The 2026 guide range for comparable work is $30,800 to $77,000 or more, with a typical benchmark of $46,200 at $12 per sq ft. The calculation uses 3,850 sq ft at $8, $12, and $20 or more per sq ft. The extended driveway area, excavation and aggregate quantities, delivery access, color selection, changes in grade, perimeter formwork, and placement sequence influence the price of this large installation across a rural property.

View the 2026 cost guide

Care and maintenance

Follow the care schedule for the selected decorative finish and sealer. Keep irrigation and gutter discharge from saturating the edges, and use snow removal methods that protect the surface texture.

Case study 39

Long residential driveway replacement

Neighborhood
Rockrimmon, Colorado Springs
Completion date
June 2024
Square footage
2,400 sq ft
Project type
Concrete driveway replacement
Long newly replaced concrete residential driveway in Colorado Springs.
Long newly replaced concrete residential driveway. A completed Driveway King project in Colorado Springs, Colorado.View gallery image 39

Original problem

The long driveway had cracked panels, rough surface wear, and uneven sections along the route to the garage. A full replacement was selected to renew the approach and address the supporting base across the entire driveway footprint. Renewing the complete route allowed the garage connection, intermediate sections, and lower approach to be considered together in the replacement layout.

Preparation

The old concrete was broken out and removed. The exposed ground was evaluated, with excavation and replacement gravel used where support needed correction. Compaction proceeded in layers. Form work established the perimeter and drainage grades before reinforcement was positioned for the replacement slab. The removal and delivery routes were established before the replacement began. Perimeter forms were secured along the long approach, and the prepared base was cleared of loose material before reinforcement support and placement access were checked.

Construction details

Concrete was placed along the driveway in a planned sequence and leveled to the established grades. The surface received a broom finish, with control joints dividing the long approach into sections. The finishing sequence continued along the full route, including the wider and narrower sections of the approach. Edges were completed as placement progressed, and the garage connection and adjoining surfaces were cleaned once the concrete work was finished. Garage separation and finished edges completed the layout, followed by curing protection before the driveway returned to vehicle use.

Finished result

The replacement presents a continuous gray concrete approach along the full driveway route. A consistent finish and organized joint layout tie the surface together, giving the garage connection and the longer residential approach one coordinated appearance throughout the property.

Cost range for comparable work

The 2026 guide range for comparable work is $24,000 to $52,800 or more, with a typical benchmark of $36,000 at $15 per sq ft. The calculation uses 2,400 sq ft at $10, $15, and $22 or more per sq ft. Driveway length and area, demolition volume, hauling access, base correction, concrete delivery arrangements, formwork, and the placement sequence are the main price factors for renewing an extended residential driveway.

View the 2026 cost guide

Care and maintenance

Follow the written curing and return to traffic instructions. Keep water moving away from the house and driveway edges, maintain the joints, and use snow removal methods appropriate for the surface.

Case study 40

Gray driveway winding through pine trees

Neighborhood
Peregrine, Colorado Springs
Completion date
July 2024
Square footage
2,800 sq ft
Project type
Concrete driveway replacement
Gray concrete driveway winding through pine trees in Colorado Springs.
Gray concrete driveway winding through pine trees. A completed Driveway King project in Colorado Springs, Colorado.View gallery image 40

Original problem

The winding approach had worn concrete and damaged outer edges where the driveway passed through the trees. The replacement needed to preserve the established route while creating a consistent driving surface within the existing wooded setting. Working within the wooded corridor required attention to the driveway boundary, the bends in the route, and nearby established landscape features.

Preparation

The old concrete was removed with equipment access confined to the work route. Excavation corrected the base, and gravel was compacted in layers. Curved form work established the driveway edges and drainage, with reinforcement arranged around the bends and existing landscape features. Material staging stayed within the established work corridor to limit disturbance beside the trees. The curved formwork was braced through the bends, and the supporting base was prepared beneath the full width of the new driveway.

Construction details

Gray concrete was placed through the curves and leveled to the planned grades. A broom finish supplied a consistent surface texture. Control joints were coordinated with changes in driveway direction, and edges were finished by hand. Finishing followed the bends while keeping the broom texture consistent through changes in direction. The inside and outside edges were completed together with the main surface, and construction residue was removed from the boundaries beside the wooded landscape. The approach remained protected during curing before normal vehicle access resumed.

Finished result

The completed gray driveway follows a winding route through the pine trees. Its curved edges and consistent surface treatment fit the established wooded setting, with the concrete approach forming a clear path through the surrounding residential landscape.

Cost range for comparable work

The 2026 guide range for comparable work is $28,000 to $61,600 or more, with a typical benchmark of $42,000 at $15 per sq ft. The calculation uses 2,800 sq ft at $10, $15, and $22 or more per sq ft. Curved formwork, limited access among trees, concrete delivery arrangements, demolition quantities, base correction, and joint planning around changes in direction influence pricing for a driveway within an established wooded corridor.

View the 2026 cost guide

Care and maintenance

Keep leaves, landscape material, and irrigation from collecting against the driveway edges. Maintain clear runoff paths and follow the written curing, snow removal, and joint maintenance instructions.

Case study 41

Expansive driveway at a two story home

Neighborhood
Briargate, Colorado Springs
Completion date
September 2025
Square footage
2,300 sq ft
Project type
Concrete driveway replacement
Expansive concrete driveway at an upscale two-story home in Colorado Springs.
Expansive concrete driveway at an upscale two-story home. A completed Driveway King project in Colorado Springs, Colorado.View gallery image 41

Original problem

The broad driveway had cracked concrete and inconsistent surface levels across the garage approach. The project called for replacement across the full footprint to create a more uniform driving surface and preserve the generous access around the home. The width of the surface required coordinated elevations and panel divisions across the main driveway and garage connection.

Preparation

The existing concrete was removed, and excavation exposed the base throughout the driveway. Gravel was corrected and compacted in layers. Form work established the perimeter, garage connection, and drainage grades, while reinforcement and joint locations were coordinated across the broad approach. Concrete delivery and finishing access were organized around the broad footprint. The formwork was braced along the outer edges, and reinforcement was supported above the prepared base before placement began across the main driveway fields.

Construction details

Concrete was placed in an organized sequence across the prepared footprint. The surface received a uniform broom finish, with control joints dividing the broad slab into planned sections. Separation was maintained at adjoining structures, and edges were finished by hand. The finishing sequence covered the full width of the approach, including the perimeter areas beside the surrounding landscape. Surface texture was carried consistently between the planned fields, and the garage connection was cleaned after the concrete work was complete. Curing protection and restricted vehicle access followed the pour.

Finished result

The finished driveway forms an expansive concrete approach to the two story home. A consistent gray surface and organized panel layout bring the broad footprint together, creating a clear relationship between the garage, driveway edges, and residential exterior.

Cost range for comparable work

The 2026 guide range for comparable work is $23,000 to $50,600 or more, with a typical benchmark of $34,500 at $15 per sq ft. The calculation uses 2,300 sq ft at $10, $15, and $22 or more per sq ft. The broad replacement area, removal and disposal quantities, base correction, concrete delivery access, perimeter complexity, joint layout, and placement sequence drive pricing for this larger residential approach.

View the 2026 cost guide

Care and maintenance

Follow the written curing and return to traffic instructions. Keep water moving away from the house and driveway edges, maintain the joints, and use snow removal methods appropriate for the surface.

Case study 42

Angled view of an expansive driveway

Neighborhood
Briargate, Colorado Springs
Completion date
September 2025
Square footage
2,300 sq ft
Project type
Concrete driveway replacement
Angled view of an expansive new concrete driveway in Colorado Springs.
Angled view of an expansive new concrete driveway. A completed Driveway King project in Colorado Springs, Colorado.View gallery image 42

Original problem

The broad driveway had cracked concrete and inconsistent surface levels across the garage approach. The project called for replacement across the full footprint to create a more uniform driving surface and preserve the generous access around the home. The width of the surface required coordinated elevations and panel divisions across the main driveway and garage connection.

Preparation

The existing concrete was removed, and excavation exposed the base throughout the driveway. Gravel was corrected and compacted in layers. Form work established the perimeter, garage connection, and drainage grades, while reinforcement and joint locations were coordinated across the broad approach. Concrete delivery and finishing access were organized around the broad footprint. The formwork was braced along the outer edges, and reinforcement was supported above the prepared base before placement began across the main driveway fields.

Construction details

Concrete was placed in an organized sequence across the prepared footprint. The surface received a uniform broom finish, with control joints dividing the broad slab into planned sections. Separation was maintained at adjoining structures, and edges were finished by hand. The finishing sequence covered the full width of the approach, including the perimeter areas beside the surrounding landscape. Surface texture was carried consistently between the planned fields, and the garage connection was cleaned after the concrete work was complete. Curing protection and restricted vehicle access followed the pour.

Finished result

This additional view shows the same expansive driveway from an angle. The photograph emphasizes the breadth of the completed concrete surface, its organized panel layout, and the relationship between the broad residential approach and the two story home.

Cost range for comparable work

The 2026 guide range for comparable work is $23,000 to $50,600 or more, with a typical benchmark of $34,500 at $15 per sq ft. The calculation uses 2,300 sq ft at $10, $15, and $22 or more per sq ft. The broad replacement area, removal and disposal quantities, base correction, concrete delivery access, perimeter complexity, joint layout, and placement sequence drive pricing for this larger residential approach.

View the 2026 cost guide

Care and maintenance

Follow the written curing and return to traffic instructions. Keep water moving away from the house and driveway edges, maintain the joints, and use snow removal methods appropriate for the surface.

Case study 43

Fresh concrete approach to a detached garage

Neighborhood
Old Colorado City, Colorado Springs
Completion date
May 2025
Square footage
650 sq ft
Project type
New concrete driveway installation
Fresh concrete driveway leading to a detached garage in Colorado Springs.
Fresh concrete driveway leading to a detached garage. A completed Driveway King project in Colorado Springs, Colorado.View gallery image 43

Original problem

The detached garage was served by a narrow gravel approach that shifted under tires and collected loose material near the door. The installation created a permanent concrete connection suited to everyday garage access within the existing residential property. The garage threshold and the limited width of the route needed attention so the new approach fit comfortably within the established property.

Preparation

Loose gravel and surface soil were excavated from the approach. The ground was graded, and gravel base was compacted in layers. Form work established the garage transition and drainage direction, with reinforcement positioned before concrete placement and adjacent property features protected. The approach boundaries were marked against the detached garage before formwork was secured. Material staging left access to the work, and the garage threshold was cleaned before the reinforcement and prepared base were readied for concrete placement.

Construction details

Concrete was placed between the prepared forms and finished with a broom texture. The new surface met the garage approach at the planned elevation, with separation at the existing slab. Control joints divided the driveway into sections. Finishing addressed the compact surface and its perimeter together, including the narrower connection at the garage entrance. The broom texture was carried through the approach, and adjacent garage surfaces were cleaned after the concrete and edge work were complete. Curing protection remained in place before vehicles were allowed onto the approach.

Finished result

The detached garage now has a defined concrete approach within the property. The simple finished surface provides a clear connection to the garage door, with organized sections and perimeter edges suited to the compact residential driveway layout.

Cost range for comparable work

The 2026 guide range for comparable work is $5,200 to $13,000 or more, with a typical benchmark of $7,800 at $12 per sq ft. The calculation uses 650 sq ft at $8, $12, and $20 or more per sq ft. Access to the detached garage, excavation conditions, approach width, aggregate base needs, concrete delivery arrangements, threshold elevations, and small project mobilization affect the overall cost of this compact new driveway installation.

View the 2026 cost guide

Care and maintenance

Follow the written curing and return to traffic instructions. Keep water moving away from the house and driveway edges, maintain the joints, and use snow removal methods appropriate for the surface.

Case study 44

Long driveway at a gated wooded property

Neighborhood
Broadmoor, Colorado Springs
Completion date
October 2025
Square footage
3,700 sq ft
Project type
Concrete driveway replacement
Long light concrete driveway at a gated wooded property in Colorado Springs.
Long light concrete driveway at a gated wooded property. A completed Driveway King project in Colorado Springs, Colorado.View gallery image 44

Original problem

The gated approach had aging concrete with rough sections along the wooded entrance route. The replacement needed to preserve vehicle access through the gate and create a consistent driveway surface without disrupting the surrounding entrance structures and landscape. The gate connection and the length of the route required a construction plan that treated the entrance and driveway as connected elements.

Preparation

The old concrete was removed in a planned sequence, with gate equipment protected from construction activity. Excavation corrected the ground, and gravel was compacted in layers. Form work established drainage and edge alignment, while reinforcement and the transition beneath the gate were coordinated. Gate equipment and nearby entrance features were protected before removal. Material staging and delivery access were arranged around the opening, and the formwork was braced through the entrance without using the gate structures as supports.

Construction details

Light gray concrete was placed along the prepared route and finished with a broom texture. Control joints followed the driveway geometry and entrance layout. Separation was maintained at gate foundations and adjoining structures. Concrete was finished through the entrance and along the wooded approach with a consistent surface texture. The gate foundations remained separate from the driveway, and the entrance area was cleaned of placement residue before construction protection was removed. Edges were completed, and the new driveway received curing protection before regular vehicle access resumed.

Finished result

A long, light gray concrete driveway now connects the gated entrance with the wooded property. The completed approach has a consistent finish and defined edges, bringing the gate connection and extended driveway route into a coordinated residential entrance.

Cost range for comparable work

The 2026 guide range for comparable work is $37,000 to $81,400 or more, with a typical benchmark of $55,500 at $15 per sq ft. The calculation uses 3,700 sq ft at $10, $15, and $22 or more per sq ft. Driveway area and length, gate protection, entrance access, removal quantities, base corrections, concrete delivery logistics, and perimeter formwork affect pricing for replacement work along an established gated and wooded approach.

View the 2026 cost guide

Care and maintenance

Keep leaves, landscape material, and irrigation from collecting against the driveway edges. Maintain clear runoff paths and follow the written curing, snow removal, and joint maintenance instructions.

Case study 45

Decorative driveway with two tones

Neighborhood
Kissing Camels, Colorado Springs
Completion date
June 2024
Square footage
1,500 sq ft
Project type
Concrete driveway replacement
Two-tone decorative concrete driveway at a Colorado Springs home.
Two-tone decorative concrete driveway. A completed Driveway King project in Colorado Springs, Colorado.View gallery image 45

Original problem

The driveway had worn concrete and a plain appearance that no longer suited the updated exterior. The replacement introduced two decorative tones to define the approach while keeping the driveway footprint and everyday access arrangement consistent. The two tone design needed clear boundaries and coordinated joints so the decorative treatment remained organized across the entire driveway surface.

Preparation

The old driveway was removed, and excavation prepared the supporting base. Gravel was compacted in layers. Form work established drainage grades and the perimeter, with the two decorative areas laid out before reinforcement placement and control joint planning were completed. Adjacent property surfaces were protected, and the finishing sequence was arranged to complete each decorative section while preserving a clear transition to the next.

Construction details

Concrete was placed to the established grades, with the two finish areas completed according to the decorative layout. Surface texture remained consistent across the driving route. Control joints were coordinated with the pattern, and edges were finished by hand. The finish boundaries received the same attention as the main decorative fields. Work progressed through the two areas in sequence, keeping the selected surface texture consistent and completing the outer edges where the decorative treatment met the surrounding property. The driveway received curing protection before returning to vehicle service.

Finished result

Two decorative tones give the finished driveway a distinct, organized appearance. The contrasting areas add definition to the approach while retaining a continuous concrete surface, connecting the driveway layout with the updated residential exterior and surrounding property.

Cost range for comparable work

The 2026 guide range for comparable work is $15,000 to $33,000 or more, with a typical benchmark of $22,500 at $15 per sq ft. The calculation uses 1,500 sq ft at $10, $15, and $22 or more per sq ft. The two finish areas, coloring methods, decorative boundaries, driveway size, joint coordination, removal requirements, and supporting base work influence pricing. Detailed transitions increase the scope compared with a single finish driveway.

View the 2026 cost guide

Care and maintenance

Follow the care schedule for the selected decorative finish and sealer. Keep irrigation and gutter discharge from saturating the edges, and use snow removal methods that protect the surface texture.

Case study 46

Dark gray driveway at a suburban home

Neighborhood
Cordera, Colorado Springs
Completion date
August 2025
Square footage
900 sq ft
Project type
Concrete driveway replacement
Dark gray new concrete driveway at a suburban home in Colorado Springs.
Dark gray new concrete driveway at a suburban home. A completed Driveway King project in Colorado Springs, Colorado.View gallery image 46

Original problem

The existing residential driveway had worn concrete and damaged sections near the lower approach. The replacement called for a simple gray driveway with a consistent surface and a clean connection to the garage and surrounding landscape edges. The lower approach and garage connection required coordinated elevations so the replacement would function as one complete surface within the existing layout.

Preparation

The old concrete was removed, and excavation corrected the supporting base. Gravel was placed and compacted in layers. Form work established the driveway edges and drainage grades, while reinforcement was positioned and the garage transition checked before the concrete was placed. The removal limits were defined at the garage and lower approach before the formwork was secured. Reinforcement was supported above the prepared base, and adjoining surfaces were protected from concrete residue during the replacement work.

Construction details

Gray concrete was placed and finished with a broom texture across the prepared driveway. Control joints divided the surface into planned sections. Finishing covered the driveway width and the transitions at both ends within the same placement sequence. The broom texture was carried between the planned sections, and cleanup addressed the garage connection and outer edges beside the surrounding landscape. The perimeter edges and garage separation were completed as part of the replacement, followed by curing protection before the driveway returned to vehicle use.

Finished result

The completed driveway appears dark gray in the gallery photograph and presents a consistent concrete approach beside the suburban home. Its organized sections and defined edges connect the garage with the lower driveway within the existing residential footprint.

Cost range for comparable work

The 2026 guide range for comparable work is $9,000 to $19,800 or more, with a typical benchmark of $13,500 at $15 per sq ft. The calculation uses 900 sq ft at $10, $15, and $22 or more per sq ft. The driveway area, removal volume, base correction, garage and lower approach elevations, delivery access, and perimeter formwork determine pricing for this residential replacement. A permanent decorative color treatment requires a separately defined scope.

View the 2026 cost guide

Care and maintenance

Follow the written curing and return to traffic instructions. Keep water moving away from the house and driveway edges, maintain the joints, and use snow removal methods appropriate for the surface.

Case study 47

Gray driveway replacement at a two story home

Neighborhood
Pine Creek, Colorado Springs
Completion date
July 2025
Square footage
1,050 sq ft
Project type
Concrete driveway replacement
Smooth gray concrete driveway replacement at a two-story home in Colorado Springs.
Smooth gray concrete driveway replacement at a two-story home. A completed Driveway King project in Colorado Springs, Colorado.View gallery image 47

Original problem

The original driveway had cracked panels and uneven areas that disrupted the approach to the garage. A full replacement within the existing footprint provided a consistent new surface and allowed the supporting base to be addressed before new concrete placement. The project also required coordination between the new garage approach and the landscape edges that framed the residential driveway route.

Preparation

The damaged driveway was removed and hauled away. Excavation exposed the base, which was corrected with gravel compacted in layers. Form work set the planned edges and drainage elevations, with reinforcement and the garage connection prepared before the new concrete was placed. The replacement boundaries were marked before demolition, including the interfaces with adjoining surfaces. The formwork was secured along the perimeter, and the garage entrance was protected while the base and reinforcement were readied for concrete placement.

Construction details

Concrete was placed across the replacement footprint and finished with a uniform broom texture. Control joints divided the slab into organized sections, and separation was maintained at the garage. The perimeter edges were finished by hand. Finishing extended across the main approach and its perimeter within the same sequence. The chosen broom texture continued between the planned sections, and the edges beside the landscape were completed before cleanup at the garage and adjoining concrete. Curing protection and restricted vehicle access supported the new surface after placement.

Finished result

A gray concrete replacement now forms a coordinated approach to the two story home. Its consistent finish, organized sections, and defined perimeter give the existing residential driveway a renewed appearance while maintaining the established connection to the garage.

Cost range for comparable work

The 2026 guide range for comparable work is $10,500 to $23,100 or more, with a typical benchmark of $15,750 at $15 per sq ft. The calculation uses 1,050 sq ft at $10, $15, and $22 or more per sq ft. Demolition and disposal quantities, base correction, driveway area, access for equipment and concrete delivery, garage transition work, and perimeter formwork are the main pricing factors for this existing footprint replacement.

View the 2026 cost guide

Care and maintenance

Follow the written curing and return to traffic instructions. Keep water moving away from the house and driveway edges, maintain the joints, and use snow removal methods appropriate for the surface.

Case study 48

New driveway at a white cottage style home

Neighborhood
Old Colorado City, Colorado Springs
Completion date
September 2024
Square footage
620 sq ft
Project type
Concrete driveway replacement
New concrete driveway at a white cottage-style home in Colorado Springs.
New concrete driveway at a white cottage-style home. A completed Driveway King project in Colorado Springs, Colorado.View gallery image 48

Original problem

The cottage had an aging driveway with broken edges and a rough surface beside the house. The replacement needed to fit the compact property, preserve the existing access route, and provide a simple concrete approach to the garage. The limited working space made the house connection and the boundary beside the landscaping important parts of both removal and replacement.

Preparation

The old driveway was removed with care around the house and adjacent landscape. Excavation prepared the footprint, and gravel base was compacted in layers. Form work established the narrow approach and drainage grades, while reinforcement and connections to existing surfaces were arranged before placement. The compact work area was organized to keep material staging clear of the house. Perimeter forms were braced within the available space, and adjoining surfaces were protected before the approach was readied for concrete placement.

Construction details

Concrete was placed within the prepared forms and finished with a broom texture. Control joints were arranged to suit the compact driveway geometry, with separation maintained beside existing structures. Edges and transitions were finished by hand. Finishing covered the narrower driveway and the edges beside the cottage within the same sequence. The broom texture continued through the planned sections, with careful cleanup along the house connection and the perimeter beside the existing landscape. The new approach was protected during curing before it reopened to vehicle traffic.

Finished result

The white cottage style home now has a clearly defined concrete approach within its compact setting. The simple finish and organized sections suit the scale of the property, with the new driveway following the established route beside the house.

Cost range for comparable work

The 2026 guide range for comparable work is $6,200 to $13,640 or more, with a typical benchmark of $9,300 at $15 per sq ft. The calculation uses 620 sq ft at $10, $15, and $22 or more per sq ft. Limited working space, protection beside the house, demolition access, driveway area, base corrections, concrete delivery arrangements, and detailed perimeter work influence the cost of a replacement on a compact residential property.

View the 2026 cost guide

Care and maintenance

Follow the written curing and return to traffic instructions. Keep water moving away from the house and driveway edges, maintain the joints, and use snow removal methods appropriate for the surface.

Case study 49

Curved estate driveway through mature trees

Neighborhood
Broadmoor, Colorado Springs
Completion date
May 2025
Square footage
3,950 sq ft
Project type
Concrete driveway replacement
Curved concrete estate driveway through mature trees in Colorado Springs.
Curved concrete estate driveway through mature trees. A completed Driveway King project in Colorado Springs, Colorado.View gallery image 49

Original problem

The curved estate approach had aged concrete and uneven edges through the established landscape. The replacement needed to follow the existing route while renewing the driving surface and coordinating construction around the mature trees and property entrance. The long curves and changing landscape edges called for a coordinated layout that renewed the approach without imposing a different driveway shape.

Preparation

The old concrete was removed with construction traffic managed along the existing driveway. Excavation corrected the supporting ground, and gravel base was compacted in layers. Curved form work established the edges and drainage grades, with reinforcement and placement access planned along the full route. Delivery access and material staging were planned along the existing corridor. Curved formwork was braced through changes in direction, and the prepared base extended beneath the full width of the driveway, including its narrower bends.

Construction details

Concrete was placed through the curved approach in a planned sequence and finished with a broom texture. Control joints followed the changing geometry, and edges were finished by hand beside the landscape. Separation was maintained at adjoining structures. Finishing followed the changing curves with attention to consistency between the broader sections and narrower bends. The inside and outside edges were completed as placement progressed, followed by cleanup of construction residue along the driveway boundary through the trees. Curing protection remained in place before the driveway returned to vehicle use.

Finished result

The completed estate driveway follows a curved route through mature trees. Its consistent gray surface and defined perimeter preserve the winding character of the approach, with the concrete layout connecting the property entrance to the surrounding home and landscape.

Cost range for comparable work

The 2026 guide range for comparable work is $39,500 to $86,900 or more, with a typical benchmark of $59,250 at $15 per sq ft. The calculation uses 3,950 sq ft at $10, $15, and $22 or more per sq ft. The extended curved footprint, access around mature trees, demolition quantities, base corrections, concrete delivery route, detailed formwork, and joint planning all influence the price for renewing a driveway through an established estate landscape.

View the 2026 cost guide

Care and maintenance

Keep leaves, landscape material, and irrigation from collecting against the driveway edges. Maintain clear runoff paths and follow the written curing, snow removal, and joint maintenance instructions.

Case study 50

Decorative paver driveway at a wooded home

Neighborhood
Cedar Heights, Colorado Springs
Completion date
June 2025
Square footage
2,100 sq ft
Project type
Paver driveway installation
Decorative paver driveway at a wooded custom home in Colorado Springs.
Decorative paver driveway at a wooded custom home. A completed Driveway King project in Colorado Springs, Colorado.View gallery image 50

Original problem

The wooded home had a worn gravel approach with recurring ruts and uneven edges. The project introduced a decorative paver driveway to provide a defined driving surface and a patterned appearance that suited the surrounding custom home and landscape. The patterned layout also required planned transitions around the driveway perimeter so the individual paving units formed a coherent property approach.

Preparation

Loose gravel and surface material were excavated to prepare the driveway footprint. The ground was graded for drainage, and aggregate base was compacted in layers. Edge locations and finished elevations were set before bedding material was prepared for the individual pavers. Temporary layout guides and edge formwork established the perimeter before the restraints were installed. The bedding allowance was coordinated with the paver depth, and the pattern was arranged around curves, borders, and adjoining property surfaces.

Construction details

Pavers were laid in the selected pattern on the prepared bedding, with cut units fitted at curves and perimeter transitions. Edge restraints supported the layout, and joint material was swept into the gaps. The surface was seated with suitable compaction equipment, then checked for alignment, drainage, and finished elevations. Paver orientation was maintained through changes in driveway direction. Final cleanup removed excess joint material, and the edge restraints were checked along the boundary beside the wooded landscape.

Finished result

The completed paver driveway creates a patterned approach to the wooded home. Individual units and coordinated perimeter details give the surface a distinct appearance, with the finished layout connecting the driveway route to the custom home and surrounding trees.

Cost range for comparable work

Paver installation is priced from a separate site proposal. For a concrete alternative covering the same 2,100 sq ft, the 2026 guide range is $16,800 to $42,000 or more, with a typical benchmark of $25,200 at $12 per sq ft. This comparison prices concrete only; the guide does not publish a paver rate.

View the 2026 cost guide

Care and maintenance

Keep paver joints filled and surface runoff paths clear. Remove debris from shaded sections and have displaced units or loose edge restraints addressed before vehicle traffic makes the movement worse.

Driveway Services

Plan the right work for your property

Concrete driveway replacementNew driveway installationDriveway extensionsDriveway repair

Request a driveway estimate in Colorado Springs

Contact Driveway King to discuss your driveway replacement, new installation, extension or repair and request a written estimate for your property. Email info@drivewayking.com or call 719.323.5024.

Request an Estimate 719.323.5024
CallRequest an Estimate